Author Topic: COP Conversion Brackets (Read 65264 times)

dcarchitect · « **Reply #90 on:** December 03, 2008, 05:09:58 AM »

nice coil on plug conversion, too bad someone painted the german color strip on the valve cover to match the Audi race logo, did you kick that guys a$$ when you caught him?
Not to ,mention the heat and oil stain discolorations its going to get on the white if anyone actually mounts this on a car for a few weeks.

THATDONFC · « **Reply #91 on:** December 21, 2008, 12:39:42 PM »

Ok I have a couple questions. How are these supposed to be wired? Where can I get the right part to wire these. Do we use the stock distribution block?

vonkamp · « **Reply #92 on:** December 21, 2008, 09:55:02 PM »

Really no wiring involved other than possibly shortening the wires (which I opted not to do). Distrubition block is outta there.
I did the conversion in less than an hour. It's pretty much plug & play.

IMHO, this and the MarkD chip are the best bang for the buck upgrades you could do. Go for it!

THATDONFC · « **Reply #93 on:** December 21, 2008, 10:15:13 PM »

so where do you plug the wires in?

haledj · « **Reply #94 on:** December 23, 2008, 11:33:10 PM »

The wires plug directly into the e46 coils unless you have a post-94 e36, then it is slightly different. I still have several kits with hardware. Let me know.

ghoulama · « **Reply #95 on:** January 25, 2009, 11:44:32 PM »

i want to buy a bracket and hardware.

PM sent

Thanks

BraveUlysses · « **Reply #96 on:** February 09, 2009, 02:31:43 PM »

I was installing these last night and was wondering exactly how I should be mounting the two pieces of all threaded rod.

I take it from an earlier post that I should cut apart the two fasteners which normally sit between the plugs (the short ones) and place the spacer and washer onto the threaded road with about the same amount of thread as the donor bolts?

Tgoode318 · « **Reply #97 on:** March 04, 2009, 12:34:42 PM »

i have a 1994 318i Convertible would it still work?

haledj · « **Reply #98 on:** March 05, 2009, 03:18:19 PM »

Yes I will, You need to check which coils you have now though.
Here is the write-up for the later style.

bwawuz02 · « **Reply #99 on:** May 03, 2009, 11:08:09 AM »

are these still available for purchase? with coils? if not, which coil will i need to purchase?

Matt-B · « **Reply #100 on:** June 14, 2009, 06:37:26 PM »

still doing these, im interested now as I have $.

ill get my own coils but brackets still going ya?

Matt-B · « **Reply #101 on:** July 27, 2009, 11:56:12 PM »

well?

vonkamp · « **Reply #102 on:** March 15, 2012, 05:55:50 AM »

Anyone have a plate or kit they would like to sell?