Author Topic: Magnaflow exhaust installed! (Read 11357 times)

gearheadE30 · « **on:** September 08, 2007, 10:01:32 AM »

Well, due to the good things I have heard about Magnaflow exhausts, I finally replaced my rusty, raspy Bosal with a #11265 replacement. Sound is amazing, without any rasp, but it has a lot of resonance around 2500 RPM. I will try to get some sound clips, but my crappy camera was clipping whenever I hit the gas. $70 for the muffler, 50 for the tips, and 77 for installation, with stainless welds.

FL318i · « **Reply #1 on:** September 08, 2007, 12:12:54 PM »

nice men!! im thinking about it, either that or the super turbo!!!
how about some videos:D??

P. Kennedy · « **Reply #2 on:** September 08, 2007, 11:21:19 PM »

I also just installed a #11265 Magnaflow. Sounds great. It looked as though Ray Charles had installed the previous muffler. I just clamped mine in. Will take to a proper shop for welding soon enough. I like your choice of tip(s). Was valance modification required to get the twins to fit?

jpod999 · « **Reply #3 on:** September 09, 2007, 12:57:15 AM »

Yes, the rear valence had to be cut to fit twin tips in there.

FL318is · « **Reply #4 on:** September 09, 2007, 07:38:09 PM »

Looks nice. Can't wait to hear it. How about a link to where you got it.

D. Clay · « **Reply #5 on:** September 09, 2007, 09:19:16 PM »

Ditto on the 2500 RPM raspiness. Must be a "thing" with M42's. I like the tips!

P. Kennedy · « **Reply #6 on:** September 09, 2007, 09:59:36 PM »

Quote from: D. Clay;33439

I like the tips!

My thoughts when entering Hooters.

gearheadE30 · « **Reply #7 on:** September 10, 2007, 09:10:59 PM »

Thanks for all the comments

. Yes, I had to cut the valence a little bit to get it to fit, but it really didn't take much. It isn't a DIY as I don't have access to a welder, and I wanted it done right the first time.

I'll get a clip or two posted soon, but I've had a tennis match every night this week :/. Maybe tomorrow...

EDIT: Now I really need to get my Taurus skirts and the rear valence painted

FL318is · « **Reply #8 on:** September 10, 2007, 10:52:39 PM »

I just noticed the plate filler. Looks good.

I did a search for your muffler using the same number and I find the price is $122. I like how the muffler has a non-visible can look from the rear. I really like the dual tips.

When you get a chance I would like to find out where you got the parts.

318iSdaniel · « **Reply #9 on:** September 11, 2007, 01:14:04 AM »

Quote from: FL318is;33488

I just noticed the plate filler. Looks good.

I did a search for your muffler using the same number and I find the price is $122. I like how the muffler has a non-visible can look from the rear. I really like the dual tips.

When you get a chance I would like to find out where you got the parts.

http://cgi.ebay.com/ebaymotors/Magnaflow-4x9-Satin-Muffler-2.25%22-in/out-11265_W0QQitemZ190149876991QQcmdZViewItem

theres a cheap one.

FL318is · « **Reply #10 on:** September 11, 2007, 09:09:48 AM »

^^^^ Thank you sir.

P. Kennedy · « **Reply #11 on:** September 11, 2007, 09:53:52 AM »

I got the same muffler at Summit Racing for $73. There was an online advertisement for ~ $54, but they were lying, they really wanted $73.

I find it puzzling that others are getting resonance. I have none, regardless of where I am in the rev band.

DZick · « **Reply #12 on:** September 11, 2007, 10:56:52 AM »

I have the superturbo and it is very raspy. i want to find a full exhaust that isnt so loud.

How loud is the Metric Mechanics? anyone know?

FL318i · « **Reply #13 on:** September 11, 2007, 01:47:50 PM »

Quote from: FL318is;33488

I just noticed the plate filler. Looks good.

I did a search for your muffler using the same number and I find the price is $122. I like how the muffler has a non-visible can look from the rear. I really like the dual tips.

When you get a chance I would like to find out where you got the parts.

where can i buy that license plate filler or whatever thats called, between the tail lights?

?

PD: i can finally see a pictured post from u "Is" for some reason your other posts i cant see images!!!

FL318is · « **Reply #14 on:** September 11, 2007, 02:42:09 PM »

Bavauto.com for one. I painted mine with trim paint before I put it on.