Author Topic: Before you get ellipsoids and make an HID Mod... (Read 3370 times)

sepehr · « **on:** June 25, 2007, 10:46:41 PM »

http://www.suvlights.com/information.php?info_id=30

Stumbled on this looking for light bulbs.

16v of Fury · « **Reply #1 on:** June 25, 2007, 10:48:07 PM »

Quote from: sepehr;28534

http://www.suvlights.com/information.php?info_id=30

Stumbled on this looking for light bulbs.

Good link - but sealed beams don't LOOK COOL :p

sepehr · « **Reply #2 on:** June 27, 2007, 12:34:56 AM »

True that. Ellips FTW.

AL GReeNeRy · « **Reply #3 on:** June 27, 2007, 01:43:30 AM »

yea those euro ellips are sexy as hell. i wouldnt pay more for anything less

D. Clay · « **Reply #4 on:** June 27, 2007, 01:41:12 PM »

I think these are similar to the Hella conversion lamps sold by http://www.rallylights.com/hella/5.75_lo.asp
They fit in OEM sealed beam brackets but are open on the back to accept HID bulbs instead of H1 and H4 like the Hellas.
I couldn't tell what the complete cost for this setup is. The Hella setup is $175.

Irishguy · « **Reply #5 on:** June 28, 2007, 11:41:08 AM »

Quote from: D. Clay;28638

I think these are similar to the Hella conversion lamps sold by http://www.rallylights.com/hella/5.75_lo.asp
They fit in OEM sealed beam brackets but are open on the back to accept HID bulbs instead of H1 and H4 like the Hellas.
I couldn't tell what the complete cost for this setup is. The Hella setup is $175.

Those look pretty promising... What modifications would I have to make to install these?

318iSdaniel · « **Reply #6 on:** July 09, 2007, 08:43:45 PM »

Quote from: Irishguy;28706

Those look pretty promising... What modifications would I have to make to install these?

i called turnermotorsport today regarding their Hella conversion kit (found here http://www.turnermotorsport.com/html/show_category.asp?txtsearchParamCat=Lighting ) and they said no modifications are required. they are designed to fit into the old connectors. the rallylights.com place seems to have a much better deal on that kit though. I have bought from there before, they are very helpful over the phone and ship quickly.

FL318is · « **Reply #7 on:** July 10, 2007, 07:53:46 AM »

If you are going the HID route, isn't there dif between the US elip and Euro elip? The conversion kit from Turner is for the 9006 bulb/low beam.

jpod999 · « **Reply #8 on:** July 10, 2007, 10:24:11 AM »

The US elips use 9006 bulbs while the Euro elips use H1 bulbs. The US elips have a cutoff like this ____ ____ where the Euro elips have a cutoff like this __/ __/ .

Author Topic: Before you get ellipsoids and make an HID Mod... (Read 3370 times)

16v of Fury