Author Topic: Power commander III: wirings (Read 3859 times)

nuvolarossa · « **on:** June 04, 2007, 07:34:55 AM »

Hi, I have now the power commander III:D :

I've read http://http://ackthud.com/shawnfogg/fuelupgrade.htm
Who can help me about its wiring?
This is the Suzuki GSX-R 1000 01-02 version, same that shawn fogg used. There are two connectors with many many wires, look the picture. How they works? One is the input and another the output?

thanks

kowalski · « **Reply #1 on:** June 06, 2007, 11:16:10 AM »

i can't help you, but what is this thing 4? what does it do? what do you plan to accomplish with it, and why are you using it? does it increase the fuel delivered or what?

nuvolarossa · « **Reply #2 on:** June 08, 2007, 03:09:57 AM »

Quote from: kowalski;27195

i can't help you, but what is this thing 4? what does it do? what do you plan to accomplish with it, and why are you using it? does it increase the fuel delivered or what?

read this:
http://ackthud.com/shawnfogg/fuelupgrade.htm

I've solved for the wirings... it was simple. Now I know how wire them.

kowalski · « **Reply #3 on:** June 08, 2007, 03:52:52 AM »

so its just a piggy back then

nuvolarossa · « **Reply #4 on:** June 08, 2007, 01:16:57 PM »

Quote from: kowalski;27390

so its just a piggy back then

Yes, it's a piggyback but with this you can control bigger injectors and tune their opening every 250 rpms and at 0, 2, 5, 10, 20, 40, 60, 80, 100 % throttle positions with oem ecu... when I'll try it I'll upgrade this thread...

bye