After replying earlier I found that link in my favorate. I read through it, it looke like a very handy guy with the correct tools for the right job. I was not all that convince that I will the mod for my M42 basing that from the fact all that work to do a mod and nothing to gain but room in the engine bay. Since the same gentlemen mentioned that going stock wires are cheaper and will be more consisitant without going through the mod. I think I will replace the old wires with some OEM and not think about getting some high performance, highly prize wires and nothing to gain from it.
Since my "Mr. Fabricator" vain has pop up in me I will find the means to shorten the wires. Instead of being routed close to the exhaust which promote increase in resistance. I am in work in relocating the coil pack to the battery tray area and shorten the wires to the plugs. I am sure there's a
8mm plug wire set so I can use the same ends to the plugs and coil.
Ben
