Author Topic: The mess under the intake (Read 331129 times)

BlueBMW · « **Reply #210 on:** February 17, 2010, 07:27:08 PM »

Are you deleting the whole mess or repairing it to stock? I put mine back to original with all new hoses and it seems great (although I'll probably regret it later). Also, maybe replace your heater hoses while you're in there.

4banger · « **Reply #211 on:** February 17, 2010, 07:28:31 PM »

deleting the mess and replacing all other heating and cooling system hoses.

Choking Hazard · « **Reply #212 on:** February 17, 2010, 11:01:10 PM »

$238.00!! Pelican is not that overpriced. Mine was $15.00. Get the part no from real OEM and stick in the pelican search field

4banger · « **Reply #213 on:** February 18, 2010, 09:29:27 AM »

Quote from: Choking Hazard;87699

$238.00!! Pelican is not that overpriced. Mine was $15.00. Get the part no from real OEM and stick in the pelican search field

my error was i was looking at the m20 water pipe above the m42 pipe in the catalog. the m20 pipe is $238.25! http://www.pelicanparts.com/cgi-bin/ksearch/PEL_search.cgi?command=show_part_page&please_wait=N&make=BMW&model=BE30§ion=WATpmp&page=5&bookmark=23&part_number=11-53-1-714-738-M200

4banger · « **Reply #214 on:** February 18, 2010, 11:29:33 AM »

i got the lower intake off today. some how i managed to rip the fuckin wire out of the sensor on oil tower so i gotta rewire that. found out that the vaccum line on my fpr was cracked damn near in 2 at the nipple. that cant be good for performance. the water pipe was broke off in the block. suprised it wasnt leaking. i think im gonna replace all the rubber under the hood with silicone.

BlueBMW · « **Reply #215 on:** February 18, 2010, 06:34:20 PM »

I was amazed at the difference in smooth running etc when I did the refresh. The COP conversion may have helped too. Either way my motor purrs like a sleeping lion.

Redpolack · « **Reply #216 on:** February 24, 2010, 01:24:41 PM »

no to long ego one of the crazy coolant pipe exploded so I did this set up too it works great for me

Rafiki · « **Reply #217 on:** February 24, 2010, 02:39:02 PM »

i got a quick question.

this says to go from the valve cover to the throttle body. but the hole that is circled on the throttle body/ intake elbow is plugged... it doesnt even go all the way through. is that normal?

mine did not have a nipple on it like pictures above. its a hole, but at the end of the hole(when looking from the inside, is plugged)

Rafiki · « **Reply #218 on:** February 24, 2010, 02:51:41 PM »

wow, i got it. it literally goes to the throttle body. the picture threw me off.

Rafiki · « **Reply #219 on:** February 24, 2010, 03:01:02 PM »

i lied, im still confused. Where does the hose from the valve cover go? straight to the throttle body? or does it go somewhere before it reaches the throttle body

Chalino · « **Reply #220 on:** February 24, 2010, 05:30:20 PM »

Quote from: Rafiki;88315

i lied, im still confused. Where does the hose from the valve cover go? straight to the throttle body? or does it go somewhere before it reaches the throttle body

Straight to the throttle body; the nipple/connection is on the underside of the TB.

BlueBMW · « **Reply #221 on:** February 24, 2010, 06:49:57 PM »

In a pure stock setup doesn't it go through the little combo air / coolant junction hose on its way to the throttle body?

Rafiki · « **Reply #222 on:** February 25, 2010, 11:19:00 AM »

Quote from: Chalino;88335

Straight to the throttle body; the nipple/connection is on the underside of the TB.

the little metal nipple going down at a 45 degree angle? anyone know what size that is? its smaller than everything else

thanks

tjts1 · « **Reply #223 on:** February 25, 2010, 12:07:26 PM »

EDIT: never mind I was wrong.

rennen · « **Reply #224 on:** February 25, 2010, 08:21:12 PM »

OK, Quick question... Hoping for a clear answer.

Where does the nipple on the bottom of the throttle body connect to? Is it capped or brought in to the Intake Hose?

Thanks
Sal