Author Topic: Hit a curb :(  (Read 4637 times)

denious

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 120
    • View Profile
Hit a curb :(
« on: April 11, 2007, 05:15:54 PM »
OK so I hit a curb, bashed both right rims, bent my control arm and the bearing's dead. Because my left bearing's soon dying I decided to replace both. But apparently there's no front bearing? Only the whole hub assembly ($117 each from Pelican)???
::: \'91 318iS, like most of us. :) :::

Wizard

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 376
    • View Profile
Hit a curb :(
« Reply #1 on: April 11, 2007, 05:56:01 PM »
Correct....The bearing itself can not be replaced (although some my argue that point)....I think if you shop around though you can find it cheaper....Maybe autohaus of fap99?
[SIGPIC][/SIGPIC]

1991 318is Diamantschwarz Black on Black
1992 850i Calypso Red on Black

jajou318

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 338
    • View Profile
Hit a curb :(
« Reply #2 on: April 11, 2007, 06:36:54 PM »
Also try BMA.
somewhat of a teaser...

Tonyb

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 268
    • View Profile
Hit a curb :(
« Reply #3 on: April 11, 2007, 09:04:13 PM »
$87.97 in bavarian autosports catalog. Check the website.
[SIGPIC][/SIGPIC]

2002maniac

  • Hero Member
  • *****
  • Thank You
  • -Receive: 0
  • Posts: 518
    • View Profile
Hit a curb :(
« Reply #4 on: April 11, 2007, 10:41:09 PM »
I did mine a few months ago and http://www.flyingbrickperformance.com had the best price.  $75

D. Clay

  • Former *********
  • Legendary
  • ******
  • Thank You
  • -Receive: 0
  • Posts: 1330
    • View Profile
Hit a curb :(
« Reply #5 on: April 11, 2007, 10:42:57 PM »
You need a 36 mm socket to get the nut off.

Tonyb

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 268
    • View Profile
Hit a curb :(
« Reply #6 on: April 11, 2007, 11:56:20 PM »
Quote from: 2002maniac;23588
I did mine a few months ago and http://www.flyingbrickperformance.com had the best price.  $75


Thats a great site! Never heard of them before.
[SIGPIC][/SIGPIC]

bmwman91

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 33
  • Posts: 2798
    • View Profile
    • http://www.e30tuner.com/
Hit a curb :(
« Reply #7 on: April 12, 2007, 12:17:20 AM »
Good post!  Never heard of them either, but my wallet likes them.  Kinda makes me think of the flying spaghetti monster.......damn you BFc off-topic!

06/05/2011 - 212,354 miles
Visit HERE for a plethora of 318iS stuff and some other randomness.  Would you say I have a, plethora, of pinatas?

b318isp

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 128
    • View Profile
    • http://www.esatclear.ie/~bpurcell
Hit a curb :(
« Reply #8 on: April 12, 2007, 07:22:30 AM »
Quote from: D. Clay;23589
You need a 36 mm socket to get the nut off.


A thin walled one too at that!

Wizard

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 376
    • View Profile
Hit a curb :(
« Reply #9 on: April 12, 2007, 05:33:54 PM »
Quote from: 2002maniac;23588
I did mine a few months ago and http://www.flyingbrickperformance.com had the best price.  $75


Flyingbrick actually doesn't stock the parts.
Ordered some parts from them a couple of weeks ago....Brake parts and bushings)..The brake parts were dropped shipped from BMA and the bushings came from Ireland Engineering...Funny thing is the Rear Toe and Camber Kit I bought through FB was cheaper then on IE's site...
[SIGPIC][/SIGPIC]

1991 318is Diamantschwarz Black on Black
1992 850i Calypso Red on Black

2002maniac

  • Hero Member
  • *****
  • Thank You
  • -Receive: 0
  • Posts: 518
    • View Profile
Hit a curb :(
« Reply #10 on: April 12, 2007, 09:05:40 PM »
Quote from: Wizard;23645
Flyingbrick actually doesn't stock the parts.
Ordered some parts from them a couple of weeks ago....Brake parts and bushings)..The brake parts were dropped shipped from BMA and the bushings came from Ireland Engineering...Funny thing is the Rear Toe and Camber Kit I bought through FB was cheaper then on IE's site...


My hubs were also drop shipped from BMA

denious

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 120
    • View Profile
Hit a curb :(
« Reply #11 on: April 12, 2007, 10:53:29 PM »
Thanks a lot fot the link!!! :D

FB put it at $132 now. So BavAuto now has the cheapest prices though you don't know who makes the items.
« Last Edit: April 13, 2007, 02:25:14 PM by denious »
::: \'91 318iS, like most of us. :) :::

Tonyb

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 0
  • Posts: 268
    • View Profile
Hit a curb :(
« Reply #12 on: April 14, 2007, 01:26:51 AM »
I never had a problem with bavautos parts, or the price.
[SIGPIC][/SIGPIC]