Author Topic: asubimmer (Read 42462 times)

asubimmer · « **on:** March 10, 2006, 02:27:41 AM »

Car:
1991 Alpinwei� II 318is slicktop
Age:
20
Interior:
MOMO Corse drivers seat
MOMO Millenium steering wheel with a MOMO hub
4 point Corbeau harness
E46 M3 illuminated shift knob
Ebrake Console delete
Glovebox delete
Rear seat and panel delete
All carpet removed
Clutch stop
German check panel
Euro foglight button
Exterior:
87' 325is air dam
Blacked out "is" trunk lip spoiler
Tinted windows
Euro plate filler
E30 m3 antenna
Borbet Type A's (7.5x16 et20 front and 9x16 et15 rear)
Engine:
M50tu
Korman Chip
K&N cone filter
Electric 16" 2850 CFM fan
AC delete
PS delete
325is single mass flywheel
IE sprung six puck clutch
Sach's HD PP
Z4 2.5l shift lever
3.73lsd
IE urethane e28 535 motor mounts
Suspension:
Korman revalved Sport Bilsteins
Korman Clubsport Springs
Offset camber plates
Treehouse racing CAB's
Korman e30 M3 adjustible swaybar links
Cage from one of the Korman M3 race cars
Brakes:
Hawk HPS front pads
Ferodo Premire rear pads
Korman SS brake lines
Custom fabbed vacuum assist canister
Lights:
Smoke Bosch Smileys
E36/E34 clear repeaters
MHW smoked turn signals
MHW smoked taillights
Exhaust:
Ebay cannon
Holley glasspack

Here are some very old pics:

Choking Hazard · « **Reply #1 on:** March 10, 2006, 07:33:11 PM »

That car looks really nice in white.....
Boy what a list. You've done it all. Wanna trade?

asubimmer · « **Reply #2 on:** March 10, 2006, 07:45:06 PM »

thanks I have done a few things to it

next thing will be the 87' 325is air dam on it

asubimmer · « **Reply #3 on:** April 03, 2006, 11:09:27 AM »

I updated my pics and I have some more on the way. The air dam is still primer white but I will be painting it asap

Zoso · « **Reply #4 on:** April 03, 2006, 11:35:26 AM »

Out of curiousity, why did you go with the es airdam? Do you like it better than what came with the car?

asubimmer · « **Reply #5 on:** April 03, 2006, 11:40:46 AM »

its the "is" air dam, the "es" doesn't have the holes in the middle bottom. I like the stock valance but I just wanted seomthing a little diff. IMO the 87' 325is air dam is the hottest. and the other reason I did it was b/c people say its not possible to make it fit

Febi Guibo · « **Reply #6 on:** April 03, 2006, 12:57:57 PM »

nice job man... was the thing hard to fit on your car?

you doing sideskirts next (don't ask me how they go on... haha)

asubimmer · « **Reply #7 on:** April 03, 2006, 12:59:59 PM »

thanks man, they aren't that hard to fit. It just takes time and patience. I want to put e36 side skirts on next. I want them b/c they will hang lower than e30 ones, giving me more room for side exhaust thats going w/ the turbo setup

Choking Hazard · « **Reply #8 on:** April 03, 2006, 08:02:47 PM »

Quote from: asubimmer

giving me more room for side exhaust thats going w/ the turbo setup

JeezeLouise! Thatsa gonna be some kinda kraaazy vehicle! Twin pipes exiting infront of the rear wheels? You should make a little baby side pipe for the wastegate!:eek:

asubimmer · « **Reply #9 on:** April 03, 2006, 08:56:17 PM »

Quote from: Choking Hazard

Twin pipes exiting infront of the rear wheels? You should make a little baby side pipe for the wastegate!:eek:

yep two exiting the front of the rear wheels like this:

I like the idea of something like that for the wastegate also...hmmm...gonna have to think about that :rolleyes:

1991318is · « **Reply #10 on:** April 03, 2006, 11:37:31 PM »

nice stuff, those side pipes and the turbo setup will be awesome

asubimmer · « **Reply #11 on:** July 25, 2006, 11:46:33 PM »

new pics in the vBGarage

StreetSpec_iS · « **Reply #12 on:** July 26, 2006, 03:42:12 AM »

hurry up and get the booster on, slapper.

Veritas · « **Reply #13 on:** July 27, 2006, 08:36:19 PM »

Quote from: StreetSpec_iS

hurry up and get the booster on, slapper.

agreed, hurry up I want a ride

Febi Guibo · « **Reply #14 on:** July 28, 2006, 08:08:00 AM »

sir charles... looking very mean!! I like it!!

Author Topic: asubimmer (Read 42462 times)

Veritas