Hi there

[ludiagsm]

Hi ludiagsm, first of all i would like to say your amazing doing all these modifications to your cars, also thanks for spending the time to actualy say about it because alot of people dont

I have been looking to turbo my 323i but parts money ect i dont realy know were to start, I have seen turbo kits on the infamous Ebay but dont know if they are any good at all? what do you suggest as they seem ok

her is the link to one

http://cgi.ebay.com/ebaymotors/BMW-92-99-E36-M3-323i-325I-328i-Demon-NEW-Turbo-Kit_W0QQcmdZViewItemQQhashZitem350173914974QQitemZ350173914974QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

cheers for any advise great work

Hi 10x for the good words .

That is china made turbo kit , it will work and it is good for begining but you may have problems with turbocharger(bad bearings) and exhoust kolector(very thin pipe walls), intercooler is smoll for 400hp ,clamps also are weak model and........ but that is good for stock m50 motor boosted on 0,5-0,6 bar of boost . You must think about some electronics to make write afr and ignition values good luck .

[shroom]

thanks for your quick reply, ye i wasnt looking to boost it realy high so that should be ok, although i was wondering is there any sellers of these types of kits outside of america so i dont have to pay the high shipping fees?

one again cheers for your help

[NoEspen]

Read the whole thread now, and wow Thanks for a lot of great tips! Keep up the good work with building powerful turboengines!

Sent you a PM I hope you can answear!

[ludiagsm]

Have some new mods on my E36 328 turbo kms stand alone 750cc RC injectors  and PT67 turbo ,still runing on 1,6 bar of boost and we have 469,9 hp on wheels . We tryed on hi pressure but for now don't have enough fuel , i need one more fuel pump and new bigger fuel hoses.
here is a dino http://www.youtube.com/watch?v=Om8bWsMIpa4

[ludiagsm]

hey whats up i have some info to shear with you pls don't bay mls cometic gaskets anymore

all you need is to oring the block and original head gasket .I try it on my 4 banger block and after dat do the same on my 328 turbo and it works great my water hoses are so soft it is like a dream in details the steel rings are from CO2 welding machine with 0,8mm diameter
and oring holls are 0,4mm deep and 0,8mm wide you can use loctide glue to fix them till put on a original head gasket here is some pics http://ludiagsm.snimka.bg/tuning/o-ringvane-316-kata.427565.all

http://ludiagsm.snimka.bg/tuning/o-ringvane-na-bloka.427303.all

[Deftones]

ludia you are the best e36 turbo tuner in the world i think! very very congratulations!

[ludiagsm]

Hi in those days i am bored from turbos and have some  new ideas here is one of them

http://ludiagsm.snimka.bg/experiment/el ... 475664.all

and clip  http://www.youtube.com/watch?v=Y7xDt3Ilhr8

[nuvolarossa]

nice!

http://ev-36.blogspot.com/

http://www.diyelectriccar.com/forums/showthread.php/bmw-318-ev-conversion-19356.html

http://www.youtube.com/watch?v=0rnL0Jay1Yo

[ludiagsm]

nice!

http://ev-36.blogspot.com/

http://www.diyelectriccar.com/forums/showthread.php/bmw-318-ev-conversion-19356.html

http://www.youtube.com/watch?v=0rnL0Jay1Yo

thanks oo I know  that guy from first link very nice project

[ludiagsm]

one more from today http://www.youtube.com/watch?v=QculgisRGLA

[ludiagsm]

yesterday i have first test with wheels on the ground with only two 12v  batteries on 24volts   and: http://www.youtube.com/watch?v=i06V8SlDf20 now i waiting for my 48volts 650Ams  controller and wandering witch kind of battery will use but i thing for beginning must use eight traction batteries 100ah 12v connected in series for 200ah 48volt

[ludiagsm]

Yesturday we made test on48 volt http://www.youtube.com/watch?v=jiNtPZCV7z0

[bmwconnect]

Hello ! we share the same passion for making these cars go fast. Do you have the timing maps from your 318 turbo with how much boost you were running? currently im running 15psi on 91octane at 20degs BTDC and no problems. car is very fast and motor is stock accept for the head bolts

[ludiagsm]

Hello ! we share the same passion for making these cars go fast. Do you have the timing maps from your 318 turbo with how much boost you were running? currently im running 15psi on 91octane at 20degs BTDC and no problems. car is very fast and motor is stock accept for the head bolts

I don't have sorry , i have only from mine 328 turbo but things are different CR octane and more ...

[bmwconnect]

I don't have sorry , i have only from mine 328 turbo but things are different CR octane and more ...

Cool thanks anyway! nice work on your cars also:)