Author Topic: 91 318is engine problem (Read 3002 times)

logger · « **on:** March 12, 2007, 09:22:34 PM »

I have a 91 318is when I get to about 4000-4500 rpm when it should be starting to excellerate faster I get a lag in power , continues to reach 7000 rpm but not as fast . Currently also have engine code 1222 . mods are dinan chip exaust and intake . Any info would be nice .

Loghan

individualist · « **Reply #1 on:** March 13, 2007, 03:53:09 AM »

Code is Lambda Control 1, I had that one the other day. It was a vacuum line that had come off the fuel pressure regulator. Start checking for vacuum leaks under and around the intake.

Alpine003 · « **Reply #2 on:** March 13, 2007, 07:44:09 AM »

Quote from: individualist;21182

It was a vacuum line that had come off the fuel pressure regulator.

The vacuum line to the fuel regulator has a tight kink to it and can often crack without it being noticable. Take off your fuel pressure regulator vacuum line and carefully check it for cracks.

logger · « **Reply #3 on:** March 13, 2007, 08:06:03 PM »

ok now I have an head gasket leak I guess this could be the power loss problem . Oil every where gay

logger · « **Reply #4 on:** March 14, 2007, 06:59:51 AM »

b318isp · « **Reply #5 on:** March 14, 2007, 11:25:47 AM »

Quote from: logger;21249

Oil every where gay

You mean its pink its there? :p