Author Topic: You call that an M42 turbo manifold? (Read 4984 times)

rob_e30 · « **on:** January 21, 2007, 09:56:31 PM »

This is a turbo manifold...

kowalski · « **Reply #1 on:** January 21, 2007, 10:44:02 PM »

did you make this or buy this? more info...

Shocker · « **Reply #2 on:** January 21, 2007, 11:21:49 PM »

That looks like a 666 Fabricaton Manifold.

asubimmer · « **Reply #3 on:** January 21, 2007, 11:34:37 PM »

so how much is it? my guess is 800+

2002maniac · « **Reply #4 on:** January 21, 2007, 11:39:15 PM »

Quote from: asubimmer;17979

so how much is it? my guess is 800+

and worth it. That is a very high quality manifold with alot of work behind it.

rob_e30 · « **Reply #5 on:** January 22, 2007, 12:53:50 AM »

This is a 666 manifold with a Jet-Hot coating. I'm very impressed with the quality and workmanship. I wanted a tuned manifold, but couldn't justify 2X the budget for a fully custom piece when there would be a chance it couldn't be done. Jon announced this at the right time so I jumped on it.

kowalski · « **Reply #6 on:** January 22, 2007, 04:13:57 AM »

seems pretty steep still though.. I can get one custom made for about 600 canadian by a more then reputable shop.

rob_e30 · « **Reply #7 on:** January 22, 2007, 10:04:42 AM »

By the time I figure the time to put the car on a trailer and take it to a fabricator, plus the delay because I could not start that step until the engine is back together and reinstalled it didn't seem like a good use of my time to "save" $100-$200. Then of couse, I'm having it fabricated in SoCal where the best quote I received from reputable fabricators was closer to 2X that price.

I understand it's not really fair to compare my dedicated racing project with those of you working on the smallest possible budget and your daily driver. It's not that I have an unlimited budget but with the Tec3, new Garrett turbo, Tial wastegate & BOV, engine internals, Racepaq G2X, etc. and my desire to get it running sooner rather than later, this was the best course for me.

YMMV.

e9nine · « **Reply #8 on:** January 22, 2007, 10:23:40 AM »

Sweet plans :eek: Can't wait to see the final completed project. Are you building a club racer? What body and class will you be racing with.

rob_e30 · « **Reply #9 on:** January 22, 2007, 06:35:16 PM »

Yes, it's a Club Racer and/or NASA GTS. D Mod with an E30 is the plan.

kowalski · « **Reply #10 on:** January 22, 2007, 10:39:47 PM »

nice. I look forward to see the results of this when its done. I start my stroker this summer, crank is on its way to my door:)