Author Topic: Probably The First Working E30 CAI Design Out There [CAD Pics Inside] (Read 7291 times)

Ramblin MAn · « **Reply #15 on:** January 07, 2007, 01:33:51 PM »

Ya, I got a helluva deal. Of course I'm the bastard step child no matter which forum I join. All of you guys have e30s so I have to glean what I can.

And bmwman91, dude, I'm the one who's jealous.

I thought about moving the airbox to the other side. The PO had started it over there I assume because he had eventual designs on a turbo. The ducting is the plastic stuff from Pep Boys. I'm hoping that the mirror polish will reflect the heat but we'll have to wait and see.

D. Clay · « **Reply #16 on:** January 07, 2007, 02:07:25 PM »

Quote from: Ramblin MAn;16942

Simpsons did it. (South Park reference)

Very good looking engine compartment, but that metal intake tube might pick up a little heat from the radiator.

Ramblin MAn · « **Reply #17 on:** January 08, 2007, 12:20:11 AM »

Like I said above, it's the chorme plated plastic stuff you can get at pep boys. I was hoping the chome would reflect the heat and plastic is a great insulator. I'm more concerned about the length than anything else. I may have to play with moving things around. I can always wrap it with the foil bubble wrap. I have a ton of that stuff from other projects.

Alpine003 · « **Reply #18 on:** January 08, 2007, 09:59:49 AM »

Quote from: Gunni;16953

I�m sure a O2 with a M42 is even more hot
I�d like one of those later

This might be a strong possiblity for next season.

kowalski · « **Reply #19 on:** January 09, 2007, 04:44:25 AM »

I have a sheer, break, CNC mill, and CNC lathe available to me, so if you need anything cut out, let me know. I could also make those COP brackets for you bmwman91 if you like.

Alpine003 · « **Reply #20 on:** January 09, 2007, 09:22:18 AM »

Quote from: kowalski;17196

I have a sheer, break, CNC mill, and CNC lathe available to me, so if you need anything cut out, let me know.

Silencer(not for automotive)? If I give you the specs?

kowalski · « **Reply #21 on:** January 09, 2007, 10:29:27 AM »

Quote from: Alpine003;17207

Silencer(not for automotive)? If I give you the specs?

haha if you have a drawing of it, and if its not to big i can probably do it for you.

asubimmer · « **Reply #22 on:** January 09, 2007, 10:59:06 AM »

you are the man at this CAD stuff!! Great work. Too bad my intake will be on the other side

nuvolarossa · « **Reply #23 on:** January 28, 2007, 06:47:31 AM »

With this thing the loud noise of cone filter will be more quiet? My K&N cone filter is too loud for my taste:confused:

Blackice · « **Reply #24 on:** October 19, 2007, 01:03:36 AM »

Quote from: bmwman91;16873

Yeah I can do that. I need to make a mock-up first as this one has no provisions for the brake lines coming out of the ABS unit. Of course, I could always send this to you and have you play with it lol. I will look into making a D-size DXF tonight.

Did you ever, Mock one up ? I would love to plot one, full size, and see if it will work.