Author Topic: Related to M42's  (Read 4124 times)

KidneyBoy

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 104
    • View Profile
Related to M42's
« on: March 21, 2006, 09:26:00 PM »
Not too sure where i would post this otherwise.

Anyway, the 318 is in need of some loving.

Parts to be replaced some upcomming weekend:
Front Swaybar links
Electric fan [$40 for a new shroud or 35 shipped for an electric]
Spring hats to drop the front end a little more and ruin my oil pan a little quicker
New Roundels for the 15" baskets
And its time to replace the clutch! woo wee

Sooooo soon!! I finally heard the word, 4 17x7.5 Hyperblack Kopis, need some love, but under 300 bucks for the set :D

bmwman91

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 33
  • Posts: 2798
    • View Profile
    • http://www.e30tuner.com/
Related to M42's
« Reply #1 on: March 21, 2006, 11:26:18 PM »
I hear the electric fan mod.  Looking into that soon!

The front spring cups...I just cannot justify $165 on some stamped metal.  Yes yes dies cost $$$, but they pay off quickly too.

06/05/2011 - 212,354 miles
Visit HERE for a plethora of 318iS stuff and some other randomness.  Would you say I have a, plethora, of pinatas?

KidneyBoy

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 104
    • View Profile
Related to M42's
« Reply #2 on: March 22, 2006, 12:25:23 AM »
I would not be able to justify that much money on spring hats either.

That being said; $59

http://www.bekkers.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=SUFT008&Category_Code=blssuspension

Cristian G in Oz

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 141
    • View Profile
How did those cups turn out?
« Reply #3 on: May 28, 2007, 03:02:20 AM »
Quote from: KidneyBoy;1118
I would not be able to justify that much money on spring hats either.

That being said; $59

http://www.bekkers.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=SUFT008&Category_Code=blssuspension


Hey Kidney Boy,

I know this is an old thread, but how did you go with these cups?

Has anyone else used them?

I want to use them but i was concerned with the amount that they said the car comes down.

TIA

Cristian
1990 318is
Alpine White, M44 head, 3.91LSD and added fun:)

Eurospec

  • Global Moderator
  • Legendary
  • *****
  • Thank You
  • -Receive: 0
  • Posts: 1093
    • View Profile
Related to M42's
« Reply #4 on: May 28, 2007, 03:12:31 PM »
Here's what someone had to say about the hats, LINK

HTH

Cristian G in Oz

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 141
    • View Profile
Related to M42's
« Reply #5 on: May 28, 2007, 09:08:39 PM »
They look the same as the ones BMP used to sell.

If what is said in the link is correct, then that is exactly what I want.

I can't come down much more than 1/2" without suffering on the drivability front.

Considering the Bekkers ones are $60 and the BMP ones were $159  I would be inclined to go the bekkers option if all I have to do is trim them up a little.

Cristian
« Last Edit: May 28, 2007, 09:09:26 PM by Cristian G in Oz »
1990 318is
Alpine White, M44 head, 3.91LSD and added fun:)