Author Topic: How to install a new head unit (Read 2805 times)

jpod999 · « **on:** December 12, 2006, 05:38:02 PM »

I just got a new headunit for my car yesterday. How can I get the old one out and this one in and then wired up.

e9nine · « **Reply #1 on:** December 12, 2006, 05:54:26 PM »

Quote from: jpod999;15491

I just got a new headunit for my car yesterday. How can I get the old one out and this one in and then wired up.

Use a very small flat head or a hex screw driver to take the old unit out.
Identify your wires per this post: http://www.m42club.com/forums/showthread.php?t=403

If you've installed a radio before - easy as pie.

If this is your first time - hurrah - it's not that hard. Just disconnect your battery before you try and please don't rush.

AL GReeNeRy · « **Reply #2 on:** December 13, 2006, 01:48:24 AM »

Quote from: e9nine;15493

Use a very small flat head or a hex screw driver to take the old unit out.
Identify your wires per this post: http://www.m42club.com/forums/showthread.php?t=403

If you've installed a radio before - easy as pie.

If this is your first time - hurrah - it's not that hard. Just disconnect your battery before you try and please don't rush.

my biggest mistake when i first started out was that i would rush the job cuz i got too tired and frustrated.. if it gets hard juss take a break and tackle it again later

just follow those diys and youll be fine

jpod999 · « **Reply #3 on:** December 13, 2006, 10:47:05 PM »

My friend came over today and practically did the whole thing for me. I would have been super lost if I would have tried it. e9nine, thanks for that link, without that we wouldn't have been able to do anything.

I'm diggin' the new headunit!