« previous next »
Pages: [1] 2   Go Down

Author Topic: planin m42 turbo build  (Read 8003 times)

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« on: October 22, 2012, 09:22:20 PM »
I have a white 91 318is. i was woundering if i could get some input on some of the things i plan to do in stage one ( if you will ) on my plan.

i'v been looking at a t3/ t4 turbo kit. I been looking at kits and forums and i feel like that my best option. 42lb injectors. on the stock rail or aftermarket rail i haven't decided. and upgraded fuel pump and fuel pressure regulator. I wanted to change my ecu with something tunable. so if anyone  has any input of this please comment.
Logged

fumstoo

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 154
    • View Profile
planin m42 turbo build
« Reply #1 on: October 23, 2012, 04:28:02 PM »
DMS has plug-n-play megasquirt. Where exactly are these kits your looking at?
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #2 on: October 24, 2012, 08:34:57 AM »
just on ebay. like turbo and inter cooler kits
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #3 on: October 24, 2012, 08:38:46 AM »
its says the megasquirt is compatible with the m20
Logged

fumstoo

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 154
    • View Profile
planin m42 turbo build
« Reply #4 on: October 24, 2012, 12:33:19 PM »
What manifold are you using? As far as i know there is no e30 m42 turbo kit
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #5 on: October 24, 2012, 05:01:26 PM »
i was gonna make one. i was gonna take and old m42 manifold cut it up and weld a knew one together.
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #6 on: October 24, 2012, 10:57:32 PM »
An if u look around they sell m42 manifolds but there 200 +
Logged

ti_tony

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 44
    • View Profile
    • Elvis
planin m42 turbo build
« Reply #7 on: October 25, 2012, 08:43:26 AM »
The m42 manifolds are cast and weldable but I would start with nice clean alumium sheet.
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #8 on: October 25, 2012, 11:34:10 PM »
I found a guy who makes them. But he was 575 just for the Manifold I rather give it shot myself first.
And u would us aluminum to make the whole manifold  ?
Logged

wazzu70

  • Nasty Nick
  • Hero Member
  • *****
  • Thank You
  • -Receive: 18
  • Posts: 671
    • View Profile
planin m42 turbo build
« Reply #9 on: October 26, 2012, 11:22:24 AM »
If you can't afford $200 for a manifold, you cant afford to go turbo. Well, you can, but it will be cheap and unreliable. You get what you pay for.

Seriously, if you skimp, it will bite you.

Start off getting the car on a management system. Once thats solid, start looking at hardware.
Logged
-Nick
91 E30 M42 with VEMS

ti_tony

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 44
    • View Profile
    • Elvis
planin m42 turbo build
« Reply #10 on: October 26, 2012, 01:09:18 PM »
The smart thing to do would probably be see how well the cast alum welds up, use a product like Protex or another alum cleaner to get it as clean as possible. It would save a lot of fab time BUT fighting dirty alum is bad and a big time waster, if any trouble then start with clean sheet. Do you have a water cooled TIG machine?
Logged

fumstoo

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 154
    • View Profile
planin m42 turbo build
« Reply #11 on: October 27, 2012, 02:55:06 PM »
Quote from: wazzu70;117147
If you can't afford $200 for a manifold, you cant afford to go turbo. Well, you can, but it will be cheap and unreliable. You get what you pay for.

Seriously, if you skimp, it will bite you.

Start off getting the car on a management system. Once thats solid, start looking at hardware.


This guy knows. Ever heard "buy nice or buy twice"? This is similar.
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #12 on: October 29, 2012, 08:24:28 AM »
Quote from: wazzu70;117147
If you can't afford $200 for a manifold, you cant afford to go turbo. Well, you can, but it will be cheap and unreliable. You get what you pay for.

Seriously, if you skimp, it will bite you.

Start off getting the car on a management system. Once thats solid, start looking at hardware.


can u tell me where i can get a manifold for 200.
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #13 on: October 29, 2012, 08:26:25 AM »
Quote from: ti_tony;117151
The smart thing to do would probably be see how well the cast alum welds up, use a product like Protex or another alum cleaner to get it as clean as possible. It would save a lot of fab time BUT fighting dirty alum is bad and a big time waster, if any trouble then start with clean sheet. Do you have a water cooled TIG machine?


i go to mass maritime. we have a welding shop with every machine u can imagine
Logged

Yaboyaponte

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 18
    • View Profile
planin m42 turbo build
« Reply #14 on: October 29, 2012, 08:28:45 AM »
Quote from: fumstoo;117187
This guy knows. Ever heard "buy nice or buy twice"? This is similar.


what system would you u go with?
i hear ur the guy to ask about m42 anything
Logged
Pages: [1] 2   Go Up
« previous next »