Author Topic: E36 '94 M42 (Read 3036 times)

Vladi · « **on:** November 24, 2006, 07:02:41 AM »

Does anyone know/have the specs of the M42 installed in the E36? I mean like hp,tq,0-60mph, etc. I've googled but with no result. Maybe i haven't searched well.

Thank you!

johna · « **Reply #1 on:** November 24, 2006, 05:44:58 PM »

From www.autotrader.com:
Horsepower: 138 hp @ 6000 rpm
Torque: 129 ft-lbs @ 4500 rpm

As tested by magazines:
1991 BMW 318is 0-60mph 10.0s, 1/4 mile 17.3s
1994 BMW 318is 0-60mph 10.1s, 1/4 mile 17.5s

4over6 · « **Reply #2 on:** November 24, 2006, 06:47:03 PM »

^^haha the e30 is faster

Vladi · « **Reply #3 on:** November 24, 2006, 10:20:22 PM »

Yes, because the E36 is about 440 pounds heavier than the E30. I'll make some test runs these days to see what my numbers are with the E36 engine in the E30 body.
I'd say an engine that can do 10s 0-60 with a 3090 pound car can get a lot faster with a 2200 pound car.

Blackice · « **Reply #4 on:** November 29, 2006, 12:41:25 AM »

I'll make some test runs these days to see what my numbers are with the E36 engine in the E30 body.

How did it fit ? Same engine mounts ? Any problems with clearance or set up ?

Vladi · « **Reply #5 on:** November 29, 2006, 04:15:24 PM »

It fit perfectly. I used M40 mounts and rubber mountings. No clearance problems, just plug and play.

Blackice · « **Reply #6 on:** November 29, 2006, 10:01:55 PM »

Quote from: Vladi;14704

It fit perfectly. I used M40 mounts and rubber mountings. No clearance problems, just plug and play.

Sweet ! :cool:

Author Topic: E36 '94 M42 (Read 3036 times)

4over6