Author Topic: Interior Lights (Read 4602 times)

tfrain · « **on:** January 25, 2012, 12:09:29 PM »

So new interior "dome" lights are like $15 from BavAuto and Pelican (at least I think). Mine were not really working right as all you had to do was touch the switch to turn it on. The driver's side was all flaky, but passenger side seemed somewhat better. I decided to take em out and have a look. Turns out the driver side, the little tab where the copper contact is for the switched power was cracked/broken. On the passenger side, the little tab thing that holds the black plastic switch was broken. I decided to fix them. First I superglued the plastic bits back on and let em dry for an hour or so. Then I sanded and got my favorite cold weld product (JB baby) and slapped it on there. Pretty much good as new. Here is a pic.

https://picasaweb.google.com/lh/photo/bRuD_qD1zZY0IPPPtDnV-9MTjNZETYmyPJy0liipFm0?feat=directlink

tfrain · « **Reply #1 on:** January 25, 2012, 12:11:33 PM »

But then I went to put them back in and broke the doggone plastic mounting thing it fits into. It was quite brittle apparently

https://picasaweb.google.com/lh/photo/sBT1cGyQk6bazGUqlPYjRdMTjNZETYmyPJy0liipFm0?feat=directlink

tfrain · « **Reply #2 on:** January 25, 2012, 12:13:34 PM »

so I fixed it with some more superglue, sanding, and JB Weld. I cut the head off a nail and jb'd it to the side. It took a while as I had to make sure the weld didn't ooze down into the whole where the light goes. I'll reinstall tonight and hope that it works. Stupid 20 year old plastic!!!

https://picasaweb.google.com/lh/photo/pC6VAlrVMPL-gRS_XHbI2NMTjNZETYmyPJy0liipFm0?feat=directlink

tfrain · « **Reply #3 on:** January 25, 2012, 12:29:27 PM »

nails

https://picasaweb.google.com/lh/photo/LuDyyA5ea3gYvHnxQjowm9MTjNZETYmyPJy0liipFm0?feat=directlink

tfrain · « **Reply #4 on:** January 25, 2012, 12:30:03 PM »

everybody knows I love my jb weld....

https://picasaweb.google.com/lh/photo/GOZFjCvGDEMmu7WFlVgaYdMTjNZETYmyPJy0liipFm0?feat=directlink

tfrain · « **Reply #5 on:** January 25, 2012, 12:32:21 PM »

rigging stuff up is the best.

tfrain · « **Reply #6 on:** January 31, 2012, 12:26:41 AM »

This little repair job worked BTW. Saved me approx $35 not counting tax and/or shipping. Lights are now working great.
But i broke the door jamb switch trying to get it to work right. The little sliding portion was hanging, and it would wait like 5 seconds or more before turning the lights on.