Author Topic: Block heater or oil heater for M42? (Read 2411 times)

Joe Gilmore · « **on:** November 02, 2011, 09:08:53 PM »

Does anyone have a good, proven solution for overnight oil or coolant engine heating in extreme cold climates? I just found out I will be working in Northern Montana for the winter. I will have access to 110v electrical outlets in the parking at my hotel.

ClubSport · « **Reply #1 on:** November 02, 2011, 09:20:31 PM »

I would look at a Zerostart coolant circulating heater. Warms up the whole block.

swimstarguy · « **Reply #2 on:** November 04, 2011, 05:39:45 PM »

I've been looking into getting one of those heaters you just stick to the bottom of the oil pan to warm up the oil somewhat. :/
Figured I'd set it on a timer an hour or so before I have to leave for work..

http://www.padheaters.com/
what I'm talking about^^

macvaugh · « **Reply #3 on:** November 09, 2011, 09:39:22 PM »

I have the factory (BMWNA) heater in mine, takes the place of the core plug on the side of the block.

I am from Northern Montana and now live in Maryland. Have never plugged it in :-)