Author Topic: head and block (Read 3511 times)

olyleroy · « **on:** July 18, 2011, 05:34:34 PM »

I've got a head with bent valves (the tensioner failed on 1st startup after getting it back from the machine shop). it's been pressure tested, shaved (it's at minimum spec). All is good. I'll include the sprockets, cams, etc. i will ship if you want it and are not local. I'm in Olympia WA. How about $125 obo?

DesktopDave · « **Reply #1 on:** July 18, 2011, 05:39:53 PM »

Dag. Shipping to PA would murder me. Surely someone closer will oblige.

olyleroy · « **Reply #2 on:** July 18, 2011, 07:50:33 PM »

I can check if you are interested

jdirty · « **Reply #3 on:** July 20, 2011, 12:42:15 AM »

do you still have the head?
if so how much would it cost shipped to 89121...?

olyleroy · « **Reply #4 on:** July 28, 2011, 05:48:39 PM »

As of today, 7/28, I still have the head. Shipping to 89121 by FedEx ground is approximately $45, and approx 4-5 days.
That would include the cams, etc.

Carter · « **Reply #5 on:** August 02, 2011, 06:27:49 PM »

If you are interested in splitting up the engine, I would like the cam sprockets and crank sprocket if they are decent.

jdirty · « **Reply #6 on:** August 18, 2011, 05:33:32 PM »

sorry didn't see that you replied to my query..
was wondering.. any piston contact damage?
and were you rebuilding the block as well? or just the head..?