Author Topic: Info Needed: Sources for BMW Connector Housings (Read 2048 times)

bmwman91 · « **on:** July 08, 2011, 01:40:08 PM »

I have been searching far & wide for some BMW connectors, specifically the ones that mates to the round one on the AFM. Can anyone provide a part number for the male side housing, terminals & rubber boot? I would really like to be able to have my MAF conversion kit plug into the stock AFM connector if possible.

Thanks guys!

dude8383 · « **Reply #1 on:** July 09, 2011, 10:19:56 AM »

hey man...so i just spent like an hour or so looking at every pic/part in realoem.

http://realoem.com/bmw/showparts.do?model=AF93&mospid=47305&btnr=12_1522&hg=12&fg=28

its GOT to be in there somewhere but i don't see an individual p/n

bmwman91 · « **Reply #2 on:** July 09, 2011, 11:52:37 AM »

Yeah, for some reason the connector is pretty elusive. I found the PN for the side I don't need on some Italian forum, and basically the housing & terminals would cost $22. So, assuming I can get a PN for the male side, I assume it will be pricey too.

I'm thinking I'll pass on that since I can source Weatherpack/Metri-Pack connectors for a lot less. Folks will just have to do some minor cutting.

dude8383 · « **Reply #3 on:** July 09, 2011, 01:53:45 PM »

Yeh shouldn't be too big a deal. Can't wait to see the finished product. Let me know if you want to distribute on the east coast. Levent @ Guten Parts would probably be down to carry some in stock at his shop.