Author Topic: ARP Bolts, Nuts, Studs and Washers! (Read 11881 times)

nomade30 · « **on:** January 21, 2011, 02:31:06 PM »

As some of you may already know, I sell ARP fasteners as a side job to help pay for tuition and get some performance modifications for my E30.

Here's a complete line up of everything I sell, if you need something different please feel free to private message me or shoot me an email at damon.earl@gmail.com

All prices include shipping within the United States!

Six Cylinder Head Stud Kits for $230 Shipped
(M20/M30/M50/S50/M52/S52/S54)

Four Cylinder Head Stud Kits for $195 Shipped
(M10/S14/M40*/M42/M44)

Six Cylinder Main Stud Kits for $190 Shipped
(M20/M30/M50/S50/M52/S52/S54)

Six Cylinder Rod Bolt Kits for $200 Shipped
(M20/M50/S50/M52/S52/S54**)

Here's a picture of the M20 Head Stud kit, SecureYourHead is the name of my business once I have the website done.

Coming in the future:
-- OEM Head Gaskets made by Goetze
-- MLS Head Gaskets made by Cometic
-- Four Cylinder Rod Bolt kits
-- Four Cylinder Main Stud kits

How to order:
-- Private Message me
-- Send a PayPal payment to damonster19@gmail.com
-- Email me at damon.earl@gmail.com

Include in your message the exact details of what your going to be using the fasteners for. If you want head studs or main studs, please give me the engine type and year of the block; Same goes for rod bolts, please provide me with what rods you are using and what type and year of motor they came out of.

You can also PM me or email me for any questions or special orders or international order quotes

Since I am a college student, I do not have the ability at this time to stock parts, I order through my father's machine shop almost once a day. It takes about 2-4 business days for me to receive the order, then I will ship them out the SAME day.

Expect 7-14 day delivery time.

*M40 Head Stud Kits do not include washers that will fit correctly, can fix this if someone will provide me with measurements of the washer used on a M40
**S54 Rod Bolts are for only early S54 with 11mm rod bolts, I can order the 10mm if you provide me with measurements of them

DesktopDave · « **Reply #1 on:** January 22, 2011, 07:36:31 PM »

Looks like a good deal. Thanks for packaging these specifically for M42 owners!

Good luck with the business & school.

nomade30 · « **Reply #2 on:** January 24, 2011, 06:23:05 PM »

Thank you very much!

bbarnumboy · « **Reply #3 on:** January 29, 2011, 02:23:43 PM »

wish you were around when i set up my arp kit. I had to measure everything and custom build a kit from a Vendor.

glad to see this and sorry i dont need anymore.

TheNewGuy · « **Reply #4 on:** February 28, 2011, 02:05:20 AM »

How much boost can the cometic headgaskets hold?

fiftytakedowns · « **Reply #5 on:** February 28, 2011, 02:18:51 AM »

Quote from: TheNewGuy;101840

How much boost can the cometic headgaskets hold?

as much as the rods can take bro.

Aus-m42turbo · « **Reply #6 on:** March 02, 2011, 07:45:20 PM »

What thickness gastkets can you go to? .14?
Thanks

nomade30 · « **Reply #7 on:** March 03, 2011, 01:09:21 AM »

0.140" should be fine on these studs. I am awaiting Cometic to approve me being a vendor for them, and it's a stretched out process. I would imagine that if you have to ask how much the head gaskets can take, you won't ever get close to the limit of it. I have seen Cometic head gaskets on 4G63's take over 30 psi.

tamtom · « **Reply #8 on:** March 03, 2011, 04:12:15 PM »

do you get hold of decompression (thicker) head gaskets?
Need to lower my compression ratio for a charger!

nomade30 · « **Reply #9 on:** March 04, 2011, 12:24:56 AM »

Quote from: tamtom;101978

do you get hold of decompression (thicker) head gaskets?
Need to lower my compression ratio for a charger!

I, at this time, can not get any other gaskets expect OEM, and my OEM head gasket price will be higher then any of the parts vendors.