Author Topic: M42 engine and transmission parts (Read 26980 times)

dunny · « **Reply #60 on:** June 26, 2012, 08:32:57 AM »

Quote from: keflaman;113385

Hey, I resemble that remark!:D

I did find a crank closer to home, but I'll be needing one farther down the road. How is the thrust bearing surface on this crank? Also interested in crank/cam sensors and temp sending units.

I've not taken out the crank yet but I will do that as soon as possible. May be during the next week. I'll touch base with you then. Thanks!

AzNVi3t2007 · « **Reply #61 on:** July 17, 2012, 04:18:04 PM »

Do you still have the head? And would you take anything less than 100.? Im in Spring, TX 77373.

How many miles on it btw?
Thanks

doitover · « **Reply #62 on:** July 17, 2012, 08:15:35 PM »

Do you still have the hub from the front of the crank? How much shipped to 27513?

Thanks,

AzNVi3t2007 · « **Reply #63 on:** July 25, 2012, 01:56:22 AM »

Still waiting on reply in regards to the head

dunny · « **Reply #64 on:** July 25, 2012, 07:17:14 PM »

Hello

Thanks for the replies. Email is the best way to contact me as I don't visit this site every day. dunnybaby69 (at) yahoo.com

At any rate, yes I still have the head and I'm at $100 shipped firm.

I'll have to check on the hub. I'll PM you

dunny · « **Reply #65 on:** August 08, 2012, 08:40:37 AM »

Head is pending....

Interest in the crank/block

PM/email me if you have interest in anything else

keflaman · « **Reply #66 on:** August 08, 2012, 09:07:14 AM »

Email sent.

dunny · « **Reply #67 on:** August 08, 2012, 02:01:24 PM »

Head is officially sold

Crank is pending to dubbedcoastie....keflaman has dibs if that deal doesn't happen.

Still have the transmission and block/rods/pistons. Also misc other parts.

thebutcher37 · « **Reply #68 on:** August 09, 2012, 01:50:10 PM »

AC compressor shipped 90660?

dunny · « **Reply #69 on:** August 10, 2012, 07:19:47 PM »

Quote from: thebutcher37;114445

AC compressor shipped 90660?

I'm not sure if it works or not, but $20 + shipping sounds good. I get a shipping quote and get back with you

dunny · « **Reply #70 on:** August 12, 2012, 11:57:23 AM »

Head was shipped out Friday, crank is being shipped tomorrow. Everything else still available. PM or email if you need something.

dunny · « **Reply #71 on:** August 15, 2012, 12:26:52 PM »

The bare head is available again - it didn't work for the buyer as it was from the wrong year ('91 and he needed a '94). Please let me know if you are interested and it will ship directly from AzNVi3t2007....he ended up finding a '94 head locally after the one he bought from me didn't work.

Bonzo · « **Reply #72 on:** August 16, 2012, 11:36:16 PM »

What is the serial number on the head? I'm definitely interested...did either you or the buyer have it pressure tested recently?

dunny · « **Reply #73 on:** August 20, 2012, 11:51:43 AM »

Quote from: Bonzo;114802

What is the serial number on the head? I'm definitely interested...did either you or the buyer have it pressure tested recently?

Check with AzNVi3t2007 - I never took down the serial number, but I know for a fact it came from a '91 M42 powered 318i sedan (which I currently drive). I had it cleaned and checked for straightness (which it was fine) but never pressure tested....AzNVi3t2007 had it into a shop but I don't know what was done. Message him and find out...I'm just trying to help him sell it since it didn't work out for his application

dunny · « **Reply #74 on:** January 29, 2013, 07:19:31 AM »

BUMP it up....I'd like to clean up some space in the garage and basement.