Author Topic: M42 engine and transmission parts (Read 27027 times)

rstimpreza · « **Reply #30 on:** January 02, 2012, 12:13:28 AM »

very interested on the complete long block with valve cover lmk if you still have this and if you can ship?

pls get a qoute shipped to 77073.

thanks

dunny · « **Reply #31 on:** January 04, 2012, 02:36:02 PM »

Hmm.....I pulled up an online shipping estimator, and the cheapest quote I found was $200!!! That's a lot, I'd say try finding one closer to houston

dunny · « **Reply #32 on:** February 21, 2012, 12:04:17 PM »

I'm looking to clean up the garage so I can work on my neon to get it back out this year. I still have most parts listed in the original post. Make offers on whatever you need. I'd like to get the bottom end, head, and transmission gone because it takes up the most space. I'm willing to drive up to 2 hours away from Middletown, Ohio to deliver any parts where shipping isn't feasible. Please email me at dunnybaby69 (at) yahoo.com - this goes directly to my phone and I can respond quickly. Thanks in advance!

ghiagern · « **Reply #33 on:** February 23, 2012, 01:42:08 PM »

Hi Dunny,
I am interested in the head. Do you still have it, and if you do have you inspected it?

dunny · « **Reply #34 on:** February 23, 2012, 02:46:56 PM »

Quote from: ghiagern;110516

Hi Dunny,
I am interested in the head. Do you still have it, and if you do have you inspected it?

The head is still available. I have not inspected it other than visually. I have a friend who has a machine shop where I may be able to have it looked at, but I'd have to pay for that (maybe not full price but something), so I've not really wanted to move forward until I had a serious buyer. Send me an email at dunnybaby69 at yahoo.com and I can take some photos and email them to you.

EDIT - keep in mind, the timing chain broke on the previous engine so the valves are no good...well, maybe some of them are but i know at least 4 of them clearly made contact with the pistons

dunny · « **Reply #35 on:** February 24, 2012, 04:58:57 PM »

So I have 3 potential buyers for the bare head. I want $125 my part, buyer pays shipping. I'm having it professionally cleaned and inspected tonight. I'll post photos when it's done. First money sent to my PayPal gets it, I want these parts gone to recoup some garage space!!!

snitzer · « **Reply #36 on:** February 28, 2012, 05:50:18 PM »

you don't happen to have the fuel injectors and crank position sensor laying around by chance???

dunny · « **Reply #37 on:** March 02, 2012, 01:44:56 PM »

Quote from: snitzer;110639

you don't happen to have the fuel injectors and crank position sensor laying around by chance???

Injectors yes, CPS I'll have to look and see. Email me and I'll get back with you once I find out about the CPS

benz-tech · « **Reply #38 on:** March 03, 2012, 11:33:53 PM »

PM sent

manning68 · « **Reply #39 on:** April 12, 2012, 04:56:44 PM »

Anything left??

dunny · « **Reply #40 on:** April 17, 2012, 11:48:26 AM »

Quote from: manning68;111819

Anything left??

Pretty much everything is left....I've been away from the forum for a bit due to work and I'm leaving on vacation tomorrow until next Wednesday. I'm going to try to get through some PMs that I have but if you need anything let me know and I'll respond. Thanks

zacrl1230 · « **Reply #41 on:** April 17, 2012, 04:37:16 PM »

rear ends?

Tismael711 · « **Reply #42 on:** April 20, 2012, 11:59:30 PM »

ICV for M42?

Dhohn · « **Reply #43 on:** April 21, 2012, 02:22:41 PM »

Would you be willing to sell the snap on cover for part number 18 from this diagram ?
I need the top cover as I have lost mine

Tismael711 · « **Reply #44 on:** April 24, 2012, 08:09:40 AM »

I need an ICV...PM or email me Tismael711@msn.com. Price shipped to 08873