Author Topic: How-To: Install An Omega REC-43T Keyless Entry Module (Read 7487 times)

bmwman91 · « **on:** December 19, 2010, 04:22:23 AM »

Zoso's how-to is great, and to the point. My installation is a little different, so I figured that I would write my own how-to to compliment it. Take a look!

http://bmw.e30tuner.com/articles_rec43t.php

I also installed one of the most overpriced pieces of silliness the other day, and wrote a little how-to for it as well.
http://bmw.e30tuner.com/articles_illknob.php

Enjoy!

PS
I got some extra modules because I accidentally clicked the "submit order" button twice. $30 shipped each within the lower 48...

romeomike · « **Reply #1 on:** December 19, 2010, 11:39:25 AM »

Thanks for the write-up. When I did this on my 91 318i, I put the control module in the battery box. If I ever decide to add this to my son's 90 325i vert, I'll do it your way.

Merry Christmas,

RM

mr ilia · « **Reply #2 on:** June 20, 2011, 03:51:10 PM »

Used your write up and it was huge help! I did it on the 1st attempt. Works great. Many thanks for your contributions to this community.

nanotech9 · « **Reply #3 on:** June 27, 2011, 10:01:05 AM »

I just saw this lastnight... my driver door lock finally busted a few years ago so i put the order in on ebay. $30 total for keyless entry sounds like a sweet deal.

SimplyDope · « **Reply #4 on:** July 01, 2011, 12:56:31 AM »

You will love it.

nanotech9 · « **Reply #5 on:** July 01, 2011, 02:16:51 PM »

all done! yay.

i'm pretty sure that if i use the output from the blue wire, run it to a simple relay, and connect the output of the relay to the left and right blinker wires, i can get the hazard lights to flash... i'll report back if i try it and have any luck.