Author Topic: Feeler: Parting out '91 318i (Read 8546 times)

Systema · « **on:** December 07, 2010, 12:51:30 PM »

I hate to see it come to this, but I think my trusty E30 has finally bitten the bullet. Luckily, I'll be moving out and won't need a car for a while, so I think I am going to part it out. Before I start tearing it to pieces, I'd like to get an idea of whether or not anybody would be interested, so if you have a need for anything, let me know! If I get enough responses I'll probably get started pretty soon.

e30itis · « **Reply #1 on:** December 07, 2010, 02:27:35 PM »

do you have fog lamps and all he wiring and switches in good condition?

sKunk · « **Reply #2 on:** December 07, 2010, 05:30:31 PM »

upper oil pan?

bmwm42 · « **Reply #3 on:** December 07, 2010, 05:43:15 PM »

door panels if black

Romrog318is · « **Reply #4 on:** December 07, 2010, 06:32:07 PM »

how is the body? and is it a 2 or 4 door?
i might be interested in the shell if its a 2 door!!!

704-998-9839

thanks
-josh-

Systema · « **Reply #5 on:** December 07, 2010, 08:32:17 PM »

Quote from: e30itis;99386

do you have fog lamps and all he wiring and switches in good condition?

I have fogs and wiring, but I don't think I have the switches.

Quote from: bmwm42;99401

door panels if black

They're tan, sorry

Quote from: Romrog318is;99402

how is the body? and is it a 2 or 4 door?
i might be interested in the shell if its a 2 door!!!

704-998-9839

thanks
-josh-

Sorry to say it, but the body is a 4 door, and it's got some battle wounds so it's not the prettiest thing in the world.

I'll get some pics up soon so you guys can get a general idea of what shape everything's in.

///M3-18is · « **Reply #6 on:** December 09, 2010, 01:15:26 AM »

bumper moldings; grills; gauges; for now

ClayW · « **Reply #7 on:** December 10, 2010, 07:55:25 AM »

I need the fuel pump/sender assembly and the engine harness connector on the chassis side. Email me at clay dot weiland at gmail dot com or call 202 seven one three 7653.

Thanks!

///M3-18is · « **Reply #8 on:** December 10, 2010, 05:35:20 PM »

front and rear bumpers

mfive · « **Reply #9 on:** December 30, 2010, 12:27:13 AM »

body side c101 connector. Please let me know. Thanks.

M

Ryann · « **Reply #10 on:** December 30, 2010, 09:43:14 PM »

Looking for front passenger side (outer) black plastic door sill trim, battery cover hardware, jack securing hardware, plastic headlight rear coverings/hardware...

Brian318is · « **Reply #11 on:** December 30, 2010, 10:41:19 PM »

I am looking for these screws from the knee bolster in the dash. http://home.comcast.net/~cdeegan9/dashboard/dscf0011.jpg

They are 3 black plastic screws.. they don't actually screw in, just a half-turn screw.

Also, looking for the switch in the trunk that turns the trunk light on.. it has 1 screw and is located right near the trunk light.

Please let me know if you have these parts shipped to 34209!

Niterider11 · « **Reply #12 on:** January 03, 2011, 12:00:26 AM »

is the cylinder head any good?

detoxed · « **Reply #13 on:** January 03, 2011, 06:37:50 AM »

afm shipped to33455?
Thanks

jakeb · « **Reply #14 on:** January 04, 2011, 09:47:15 AM »

does it run? What is the condition of the engine. I live in Michigan (Bay City) and might be interested in the entire drivetrain.... engine, trans (linkage), radiator, driveshaft, wiring, sesnors, etc etc

I sent you a PM as well

Author Topic: Feeler: Parting out '91 318i (Read 8546 times)

///M3-18is

///M3-18is