Author Topic: INPA on M42 (Read 6367 times)

cristimm · « **on:** September 03, 2010, 07:04:35 AM »

Did anyone used INPA diagnose software on M42? I just bought an ADS interface like this one:

http://cgi.ebay.com/ebaymotors/BMW-INPA-Ediabas-OBD-ADS-Interface-_W0QQcmdZViewItemQQhashZitem2eadc35e29QQitemZ200483757609QQptZMotorsQ5fAutomotiveQ5fTools

I just got it today, didn't had time to test it.

cristimm · « **Reply #1 on:** September 05, 2010, 02:48:05 AM »

I managed to make it work. It is so much better than CARSOFT. I'll come back with some screenshots.

However I still have a big issue: I can't access the DME.

cristimm · « **Reply #2 on:** September 05, 2010, 02:59:35 AM »

This is the error I get:

cristimm · « **Reply #3 on:** September 05, 2010, 09:45:17 AM »

Please advise.

DesktopDave · « **Reply #4 on:** September 05, 2010, 12:39:26 PM »

Hmm. I wish I had INPA. I have the cheap EBay Carsoft reader that sorta works. I was under the impression that INPA won't work. Can you PM me some directions if you've found differently?

cristimm · « **Reply #5 on:** September 06, 2010, 04:14:35 AM »

I have a carsoft as well but I want more. INPA and DIS will work for sure with the right interface. It is already working on my car on every module except DME. I'll post details when I'll sort out this issue,

selespeed · « **Reply #6 on:** January 31, 2015, 10:48:05 PM »

Quote from: DesktopDave on September 05, 2010, 12:39:26 PM

Hmm. I wish I had INPA. I have the cheap EBay Carsoft reader that sorta works. I was under the impression that INPA won't work. Can you PM me some directions if you've found differently?

Hi Dave;

i am considering buying INPA. is it good enough for M42 diagnostics? i want to see the running parameters as what Autologic is able to do. including resetting errors and LEDs

thank you.

teo