Author Topic: Pal318is Updated Pic's 06/09/06 (Read 7823 times)

Pal318is · « **on:** September 04, 2006, 06:01:43 PM »

Took a few pic's today, after cleaning the ol' girl, she deserved it winkeye Superb weather at the moment in my hometown at the moment!!!

Hope you like them..Oh and excuse the BIG TOE in some of the pic's

Pal

asubimmer · « **Reply #1 on:** September 04, 2006, 07:05:23 PM »

try going to tinypic.com and using the code w/ the [img] in it

tim_s · « **Reply #2 on:** September 05, 2006, 03:20:30 AM »

hey pal, list of zoners on here is ever-increasing.

Pal318is · « **Reply #3 on:** September 05, 2006, 04:36:46 AM »

Quote from: tim_s

hey pal, list of zoners on here is ever-increasing.

Dude, how's it going?? never knew there was a site dedicated to the m42 like this!!

How many other zoners do we have then??

Pal

Pal318is · « **Reply #4 on:** September 05, 2006, 05:06:38 AM »

Some Pic's I have. More to follow.

w/

w/

These two were taken at the BMW Car Club National Show a couple of weeks ago.

The car itself is just about to benefit from a new 116k engine i've just bought and will also modify ever so slightly before it goes in!

As for the car itself at the moment :-

Exterior - Brilliant Red,
Clear Indicators all round,
All Red MHW rear clusters,
Alpina Boot/Bonnet badges, coz i love them!
Retro fitted rear pop out windows,
Rear number plate holder colour coded red
De-chromed all round, including front Kidney Grill
Se side skirts
M-Tech 1 rear spoiler
BMW Mud flaps all round too.
Interior - Beige Leather Recaro seats with back piping
Beige and black door cards
Alpina wooden Gearknob
Motorsport Wooden sterring wheel
Retro fitted 13 button OBC
Retro fitted Maplight Mirror
Retro fitted electric sunroof
Retro fitted rear blind (only yesterday!!)
Leather M-stripe Gear gator
Leather M-stripe handbrake gator
M-tec Alloy foot pedals

Suspenion - Eibach 40mm Lowering springs all round
Koni Adjustable shock absorbers all round
Sparco double tube strut brace - front
Sparco single tube strut brace - rear

Wheels - 7.5" x 17" Azev A's with Falken tyres

Brakes - EBC grooved and drilled discs front
Zimmerman cross drilled rear discs
Padgid fast road pads all round

Engine - waiting for the new one to go in, apart from that, half system,
stainless steel custom made exhaust.
future plans for the new engine before it goes in....
Complete polish, clean and the sparay the new engine/gearbox in
black and red, with polished fins.
electric fan, get rid of normal one,
Larger throttle body, get rid of the backing plate,
BMC cold air induction kit
Uprated chip (undecided as of yet)
Uprated clutch (also undecided yet)

ICE - Never really been that bothered tbh, as long as I get some sort of
sound, that'll do me.

I think that's it!?

Pal

asubimmer · « **Reply #5 on:** September 05, 2006, 07:50:04 AM »

man thats is really nice!! Keep up the good work

FL318is · « **Reply #6 on:** September 05, 2006, 08:05:47 AM »

Nice ride! Great to see more UK mates here. Enjoy.

Cheers!

Pal318is · « **Reply #7 on:** September 05, 2006, 01:37:00 PM »

thanks for the comments guys. There's some sweet motors on this site...loving it.

Pal

mikesjo · « **Reply #8 on:** September 06, 2006, 01:42:27 AM »

I want your wheels...

tim_s · « **Reply #9 on:** September 06, 2006, 02:59:19 AM »

pal those are great pics. got any of the inside?
you got another engine in the end then! you sure you dont want some go to match the show? Still think you should consider a little engine work - why don't you take your time and do a few odds and sods to the new engine? mb get a rebore and some bigger pistons, skim the head and add some cams? just to give it those few extra ponies! i just figure you'll regret it if you don't do it while the engine's out. you gonna put a new timing chain on too?
as for zoners on here, dan, robin, kos, eko and i'm sure a few others are here.

Pal318is · « **Reply #10 on:** September 06, 2006, 04:42:58 AM »

Quote from: tim_s

pal those are great pics. got any of the inside?
you got another engine in the end then! you sure you dont want some go to match the show? Still think you should consider a little engine work - why don't you take your time and do a few odds and sods to the new engine? mb get a rebore and some bigger pistons, skim the head and add some cams? just to give it those few extra ponies! i just figure you'll regret it if you don't do it while the engine's out. you gonna put a new timing chain on too?
as for zoners on here, dan, robin, kos, eko and i'm sure a few others are here.

Tim,

Your right in what your saying buddy, while i have the engine out, i may aswell do some other bits to it! but in all honesty I really don't know what to do? I thought that a throttle body, chip and air flow would be ok for me, how much bhp can I really expect to gain? without spending more of the all important READIES!!

I dunno bud, we'll have to wait and see. I would like to change the chain while i'm at it though for sure.

I'm gonna clean the car today so will post some pics up later, of inside and out!

Pal

mikesjo - there's a set for sale on the e30zone - �500...You know you want them!!

mikesjo · « **Reply #11 on:** September 06, 2006, 01:40:47 PM »

Student funds won't allow, lol. I think the Azev As and BBS rims look the best on this car. That's my opinion

.

Pal318is · « **Reply #12 on:** September 06, 2006, 01:46:42 PM »

Quote from: mikesjo

Student funds won't allow, lol. I think the Azev As and BBS rims look the best on this car. That's my opinion .

Definately agree, i'm looking to get a set of bbs split rims, in the future though. Same sort of senario really, my funds need to be distributed evenly, Car-10%, Kids-20%, Wife-30%, Home-40% as you can see my missus takes up a nice percentage, but she is worth it

Pal

FL318is · « **Reply #13 on:** September 07, 2006, 08:45:08 AM »

Compliments on the ride. Very sweet!

M42boy · « **Reply #14 on:** September 08, 2006, 09:30:47 AM »

Quote from: Pal318is

Some Pic's I have. More to follow.

These two were taken at the BMW Car Club National Show a couple of weeks ago.

Those AZEV's still look hot. Great looking time period wheel.

Okay, I have that same strut tower brace and it won't fit my car or my neighbor's... What gives??? I might be eventually fabbing a custom adjustable one.

I notice the Auto Glym on the seat... That stuff is TITS.. but very hard to find here in the US. Some of the Rover places import it.

Author Topic: Pal318is Updated Pic's 06/09/06 (Read 7823 times)

Pal318is

Pal318is Updated Pic's 06/09/06

asubimmer

Newbie from the UK

tim_s

Newbie from the UK

Pal318is

Newbie from the UK

Pal318is

Newbie from the UK

asubimmer

Newbie from the UK

FL318is

Welcome!

Pal318is

Newbie from the UK

mikesjo

Newbie from the UK

tim_s

Newbie from the UK

Pal318is

Newbie from the UK

mikesjo

Newbie from the UK

Pal318is

Newbie from the UK

FL318is

Very Nice!

M42boy

Newbie from the UK