Author Topic: FS: M42 LTW Flywheel & Clutch (Read 5076 times)

Boosted E30 · « **on:** March 20, 2010, 09:51:11 AM »

I have for sale a ltw flywheel from Bmpdesign and a Spec Stg 3 clutch. The flywheel weighs around 10-12lbs and i think the clutch is about the same. That makes this whole set up around 24lbs all thogether:eek: this makes the little m42 really come to life.

I WILL NOT be selling these seperatly unless i have a buyer for both.

I would like to see this setup go to somone who is building a track car or has a track car as it is not the most friendly to drive on the street (reason im selling) If you buy this and put it in your DD dont cry to me.

Clutch and flywheel have around 5000km on them.

Looking to get $600cnd obo I will include shipping for that price to Canada or US.

Romrog318is · « **Reply #1 on:** March 20, 2010, 12:28:27 PM »

umm i think you might be asking a bit too much for this... just sayin
it looks like the flywheel has MAD hot spots
but GLWS

Boosted E30 · « **Reply #2 on:** March 20, 2010, 09:43:51 PM »

You can change the friction surface. It does not have any worse hot spots then any other flywheel I have ever seen. It is dirty but that's about it.

I'm not firm on the price.

http://www.specclutch.com/cars/BMW/318/1991/Single

http://www.bmpdesign.com/category-exec/category_id/47/search_year/1991/search_model/31

Nomadic · « **Reply #3 on:** March 21, 2010, 03:22:53 AM »

Is this a 215 or a 228 setup? What's the cost on a new friction surface?

Boosted E30 · « **Reply #4 on:** March 21, 2010, 11:00:36 AM »

huh? i have no clue what you mean with 215 or 228....teeth on the ring gear? you would have to call bmpdesign for a price on a new friction surface. I dont think it is more then a 100$.

Nomadic · « **Reply #5 on:** March 23, 2010, 01:17:16 AM »

215mm vs 228mm. Upgrading from the 'stock' m42 215mm flywheel/clutch size to the m20 228mm is supposed to handle more torque (at least with the oem clutches )

Boosted E30 · « **Reply #6 on:** March 25, 2010, 02:29:56 PM »

Ok total diameter of the friction surface is 228mm so I guess the flywheel is for factory clutch.

Hey-u · « **Reply #7 on:** February 22, 2011, 11:01:58 PM »

Do you still have this for sale?

Boosted E30 · « **Reply #8 on:** February 27, 2011, 08:18:26 PM »

Sold a while ago.