Author Topic: WTB- washer for cam gear bolt. Thats all. (Read 3684 times)

Choking Hazard · « **on:** February 23, 2010, 07:14:01 PM »

Somebody got one from an M-42 tear down? It is a thick copper washer- there are 4 on each cam gear. Got the bolt. But lost the washer...

Easy money for dropping it in a CD mailer and sending it down to the stupid guy who lost the washer....

Anybody?

dsm2002 · « **Reply #1 on:** February 23, 2010, 07:59:45 PM »

My first thought is that such a washer would be cheap from BMW. When I looked at Realoem, however, does not show washers in these positions. I'll try to look at the M42 head I have at home to see if this head has them. Even if it did, I would not have any spare, though.

4banger · « **Reply #2 on:** February 24, 2010, 12:58:39 AM »

Quote from: Choking Hazard;88228

Somebody got one from an M-42 tear down? It is a thick copper washer- there are 4 on each cam gear. Got the bolt. But lost the washer...

Easy money for dropping it in a CD mailer and sending it down to the stupid guy who lost the washer....

Anybody?

i dont have a spare but im going to a fairly large pickApart tomorow and ill see if there is any m42 cars.

dsm2002 · « **Reply #3 on:** February 24, 2010, 05:42:13 AM »

I checked my engine and there are washers. It seems to be integral to the bolt. I hope you find some.

Choking Hazard · « **Reply #4 on:** February 24, 2010, 10:17:53 AM »

BMW and Pelican and Tischer all say the part number is probably the bolt ONLY. I found a near substitute. I think as long as the two opposing washers are equal weight, it should not be a problem, but I would prefer to use the right washer.

4banger · « **Reply #5 on:** February 24, 2010, 02:30:10 PM »

if you still need the washer i bought a m42 from rthe pickApart today and im gonna pull it tomorow. let me know.

Choking Hazard · « **Reply #6 on:** February 24, 2010, 05:47:07 PM »

You bet!
PM sent...

4banger · « **Reply #7 on:** February 24, 2010, 06:21:53 PM »

pm'd bac. keep a eye in the mail next week.