Author Topic: Post your suspension setup (Read 29056 times)

rjcaptsean · « **Reply #45 on:** January 28, 2011, 01:40:42 PM »

The only Vert in here has an M3 setup. Just talked to H&R and they say that the reg 318is sports will sag lower in the back and look bad. What are people using in the verts for lowering?

JakeP · « **Reply #46 on:** February 02, 2011, 07:45:42 PM »

Why don't we try using this format and include part numbers/spring rates if you have them:

Year:
Model:
Wheels (##x## et:##):
Tires:
Spacers (if any):

Front Springs:
Front Shocks:
Front Sway Bar:
Other Front Suspension Mods:

Rear springs:
Rear Shocks:
Rear Sway Bar:
Other Rear Suspension Mods:

Pictures:

bwawuz02 · « **Reply #47 on:** February 07, 2011, 03:07:28 PM »

This weekend I installed...

New control arms and M3 CABs
H&R 29664 springs
Bilstein Sports
E90 drop hats

I'm pretty pleased with the looks and very pleased with the comfortable ride, yet much improved handling.

Next weekend...
Z3 rack swap

JakeP · « **Reply #48 on:** February 09, 2011, 06:04:18 PM »

Quote from: bwawuz02;101232

This weekend I installed...

New control arms and M3 CABs
H&R 29664 springs
Bilstein Sports
E90 drop hats

I'm pretty pleased with the looks and very pleased with the comfortable ride, yet much improved handling.

Next weekend...
Z3 rack swap

And yet you don't post pictures or measurements.... :confused:

bwawuz02 · « **Reply #49 on:** February 10, 2011, 08:01:00 PM »

i will soon, when it's all done. I gotta finish up and swap in the rear subframe i'm building (refreshed 3.91 LSD w/MZ3 bushing, AKG 80A subframe bushings/75D TA bushings, weld-in camber/toe kit, re-inforced TAs, and new rear wheel bearings... just waiting on the bushings/bearings to get here so I can put it all together) Still waiting for my backordered General Exclaim UHP tires to come so i can mount my kosei K1s that are almost refinished.

mr.vang · « **Reply #50 on:** February 11, 2011, 01:06:15 AM »

cosmo coil, cosmo adjustable top mount, sport billy

bwawuz02 · « **Reply #51 on:** March 13, 2011, 12:49:53 PM »

the rear end isn't finished yet, but I can email you some teasers. She's no beauty queen, but my fav E30 to drive having own 2 325is in the past.

95 318ti M42 is on the stand with M44 crank inside. Engine will be at Rebello Racing later this month getting the bottom end put together/balanced, just waiting on pistons to show up.

Nick_318is · « **Reply #52 on:** March 13, 2011, 03:28:58 PM »

I'm running the following:

Dinan Springs
Bilstien Sports
M3 CAB
Ireland Engineering 22/19 adjustable bars

The stance before and after:

bwawuz02 · « **Reply #53 on:** May 22, 2011, 03:10:14 PM »

H&R 29664 / Bill Sports
GC Touring plates
10mm rear spring pads
ST Sways

Still haven't had time to swap my rebuilt rear-end in, or put on the RX-7 brakes.

White lower valence will be here on Tuesday. Then I'll be ordering an IS lip/skirts and hitting the body shop.

Kosei K1 15x7 et27 205/50/15 Dunlops