Author Topic: M42 Engine Parts (Read 6851 times)

Drewdown · « **on:** March 18, 2011, 04:48:01 AM »

Hey guys, I have some parts left over from a blown engine out of a 91 318is. Im kind of a noob when it comes to m42s so try and work with me as best as possible. Prices are going to be a rough estimate based on what other people sell for... if Im way off base just let me know. Also everything is OBO

Parts are located in the Bay Area, California

Oil Filter Housing - Make me an offer

Headers - Best offer on this one too

Lower Intake with Injectors and Fuel Rail sold
Throttle Body -sold
Upper Intake Manifold sold
AC Compressor - 30 The outside of the pulley is dinged up as you see in the pic... shouldnt effect it though :dunno:

DSC_0923.jpg by Drewdown49, on Flickr

DSC_0924.jpg by Drewdown49, on Flickr

Power Steering Pump - 25

DSC_0927.jpg by Drewdown49, on Flickr

Alternator -sold

Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one

Crank Pulley - 10

Harmonic Balancer - 10

ICV - Sold

Thermostat Housing - 7

Valve Cover - Sold

Coil Wiring - 15

Tranny Plate thing (Sorry I forget the name) - 5

Cam and Crank Timing sensors - 10 each

I still have basically the whole bottom end. The block and the crank are gone but I might be able to salvage other parts.

Drewdown · « **Reply #1 on:** March 18, 2011, 01:12:27 PM »

Upper and Lower Timing Case Covers - 15 each

Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one

Crank Pulley - 10

Harmonic Balancer - 10

ICV - 10

Thermostat Housing - 7

Valve Cover - 25

Coil Wiring - 15

Tranny Plate thing (Sorry I forget the name) - 5

Okay so now comes the tricky part... I Have a whole head assembly from the engine that blew. The cams are in good shape and none of the valves appear to be bent. Sorry I cant describe the condition of this thing very well, but I can take a lot of pictures, so just ask :rofl: The piston on cylinder 2 went out, so the head got a small nick as you can see here in the upper right corner:

Overall pics

Cams

The head can either be sold complete with cams and everything or parted out.

One last thing not pictured sorry

Cam and Crank Timing sensors - 10 each

Prices are flexible... and if there's anything I didnt list that you might need form an engine just ask... I might have it.

hnilsen · « **Reply #2 on:** March 27, 2011, 02:04:03 PM »

I realize this is an old post, but wondering if you still have the a/c compressor and power steering pump? Would you take $25 a peice for them?
hnilsen@canalbarge.com

Drewdown · « **Reply #3 on:** June 01, 2011, 01:24:23 PM »

DesktopDave · « **Reply #4 on:** June 01, 2011, 02:34:32 PM »

I approved your 2nd post so you can merge or delete it. I must have missed it the first time.

Artem · « **Reply #5 on:** June 01, 2011, 03:53:14 PM »

Please write to Artem dot Lepilov at gmail dot com, I need a few pieces you got. Specifically, the throttle body pieces and maybe the ICV.

Thanks!

bmwman91 · « **Reply #6 on:** June 01, 2011, 07:39:57 PM »

Any chance you have the front exhaust support bracket parts (the stuff that bolts to the bottom of the tranny & holds the downpipe)?

e30work · « **Reply #7 on:** June 03, 2011, 12:11:34 AM »

do you have an upper oil pan? thanks

carguy101 · « **Reply #8 on:** June 28, 2011, 10:45:56 AM »

How well does the a/c compressor work?

ClayW · « **Reply #9 on:** June 30, 2011, 09:30:11 AM »

Still have the Thermostat housing? Compressor?

ApexGoblin · « **Reply #10 on:** July 16, 2011, 03:27:39 AM »

still have the exhaust manifold? and where are you located?

Carter · « **Reply #11 on:** August 02, 2011, 03:31:24 PM »

Are the cam gears, crank gear, and lower guide in good shape? If so I'll take them!

stillmatick · « **Reply #12 on:** August 02, 2011, 07:05:30 PM »

is that a denso compressor?? if so i take it.

sailer6460 · « **Reply #13 on:** August 28, 2011, 10:06:28 AM »

PM sent