« previous next »
Pages: [1]   Go Down

Author Topic: LUK clutch  (Read 2719 times)

1991318ic

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 1
    • View Profile
LUK clutch
« on: June 25, 2011, 01:00:35 PM »
Apparently my trusty 91 318IC came with a LUK clutch instead of the usual Sachs model, which is a surprise.  Sachs replacement will not fit.  Did the LUK clutch come with its' own dual mass flywheel?  Any info appreciated as this is a head scratcher.

Thanks

Steve
Logged

DesktopDave

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 60
  • Posts: 5076
  • Lives in the 80s
    • View Profile
    • The Iconic BMW
LUK clutch
« Reply #1 on: June 25, 2011, 04:35:57 PM »
I thought they were interchangeable?  The parts should be the same...check the part number against RealOEM...that's the acid test.
Logged
'08 Karmesinrot 128i 6MT
'86 Zinnoberrot 635CSi (M30B32/G265/3.46 torsen LSD)

Sold: '97 Montrealblau 318iS, '91 Brilliantrot 318i, '91 Brilliantrot 318iS

PumpItUp

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 170
    • View Profile
LUK clutch
« Reply #2 on: June 25, 2011, 04:39:53 PM »
You should be doing the m20 flywheel conversion anyways!
http://m42club.com/forums/showthread.php?p=104820#post104820
http://m42club.com/forums/showthread.php?t=5696

I did read that the 325i convertible single-mass flywheel was thinner and required no modification for using on the m42, while many/all of the non convertibles had a slightly thicker flywheel which required shaving down to not hit the block.
Logged
Pages: [1]   Go Up
« previous next »