Author Topic: starter replacement help (Read 5723 times)

bdaddy · « **on:** October 18, 2008, 09:36:09 AM »

can someone please help me on the easiest way to replace my starter on my e36 m42. Im completely clueless. thanks alot

szed03 · « **Reply #1 on:** October 19, 2008, 04:11:05 PM »

Here you go:
http://www.pelicanparts.com/bmw/techarticles/101-Projects-84-Starter/101-Projects-84-Starter.htm

If you're planning on doing a lot of work on the car on your own, invest in a Bentley service manual for the e36. You'll be glad you did!

hoevesruperd · « **Reply #2 on:** October 19, 2008, 08:43:46 PM »

do you need the starter? i have one for sale

txleadfoot · « **Reply #3 on:** November 06, 2008, 07:49:16 AM »

I like how Pelican mentions "If you happen to have your transmission out of the car, it�s really easy to replace the starter."

What they don't tell you is that you must disconnect/remove the starter from the transmission before the transmission will budge.

Quote from: szed03;58858

Here you go:
http://www.pelicanparts.com/bmw/techarticles/101-Projects-84-Starter/101-Projects-84-Starter.htm

If you're planning on doing a lot of work on the car on your own, invest in a Bentley service manual for the e36. You'll be glad you did!

Mbryce42 · « **Reply #4 on:** December 19, 2010, 02:56:48 PM »

So does that mean you have to take off the intake manifold to take of the starter to take off the tranny?

MLM · « **Reply #5 on:** December 20, 2010, 03:31:47 AM »

Just replaced my starter due to my clumbsyness tightening the wiring studs causing one to break.. I had the manifiold off at the time and struggle to see how you could do it from the top with this in place. The manifold says its possible from below though. Book a neck massage in advance though...

Oh and dont overtighten the small stud terminals, mine were surprisingly weak..