« previous next »
Pages: [1]   Go Down

Author Topic: Idle control value  (Read 2254 times)

dlmrun2002

  • Full Member
  • ***
  • Thank You
  • -Receive: 1
  • Posts: 100
    • View Profile
Idle control value
« on: April 19, 2007, 07:25:11 PM »
Well  engine  runs great ( New rebuilt )  but idle is poor. Looking for ohm value on idle control valve across  the two lead  connectors. I'm reading 8 ohm  and when I vary the valve it seems to go down a bit but comes back up to 8 ohm value even with valve in different position. This seems wrong. Purcell said value  is 4 ohms. Is this right?  Thanks
DLM
Logged

b318isp

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 128
    • View Profile
    • http://www.esatclear.ie/~bpurcell
Idle control value
« Reply #1 on: April 23, 2007, 07:20:51 AM »
Quote from: dlmrun2002;24087
Well  engine  runs great ( New rebuilt )  but idle is poor. Looking for ohm value on idle control valve across  the two lead  connectors. I'm reading 8 ohm  and when I vary the valve it seems to go down a bit but comes back up to 8 ohm value even with valve in different position. This seems wrong. Purcell said value  is 4 ohms. Is this right?  Thanks
DLM


The M42 ICV is electrically actuated and spring returned. I'm not sure of the exact method of control, but a fixed impedence may be satisfactory. What are the symptoms of the bad idle?
Logged
Pages: [1]   Go Up
« previous next »