Author Topic: Anyone driven a 318is that has all 136 horses? (Read 7369 times)

fabe · « **Reply #15 on:** May 10, 2010, 10:34:55 PM »

Mine made 126rwhp with stock engine, SMT6 piggyback ECU and other bits of bolt on mods....
Still have room for more horses....

Andy_Casey · « **Reply #16 on:** May 11, 2010, 03:15:09 AM »

155-160bhp at the fly. The M42 engine has a few flat spots but once you're about 4.5k RPM it flies. Did some 0-60 runs on my GPS logger and an average of 10 runs was 6.85s. Happy with that

Looking forward to getting the 205/50R15s to replace the 205/55R15s and give a bit more shove and better handling, unfortunately it'll mean that I need 3rd for 0-60 so that will drop. Tempted to get a 4.4 diff in there and make it a real screamer

Mods to the engine are M44 block, regrind cams, E30zone chip, 2.25" exhaust, air filter, modified airbox, viscous fan removed.

colin86325 · « **Reply #17 on:** May 12, 2010, 08:41:19 PM »

Mine probably has all horses and then a little bit. I have about 14k miles on a rebuilt engine. Mods are a mild intake cam and a MarkD chip, single-mass flywheel, and viscous fan delete.

I had to replace my cat to pass smog recently, so a Magnaflow cat (4-year warranty) was fitted.
I don't think these stock exhausts are very restrictive--the M20 guys don't really get much from a cat-back system--unless the muffler itself is that much more restrictive (which could be true to prevent the car from sounding like a Civic). Anybody care to comment?

Hey-u · « **Reply #18 on:** May 13, 2010, 02:44:52 PM »

Mine was dyno'd at 122 last month with only an EBay Dinan chip and 170,000km. Have since made some further mods but no dyno yet.

carguy101 · « **Reply #19 on:** May 13, 2010, 09:01:13 PM »

Quote from: nickmpower;91747

when i had a 8.5lb flywhel and markd chip it was FTW. Now, with a DASC is is FTMFW!!!

Who makes the 8.5 and how was that to drive in traffic?

dvmotorsports · « **Reply #20 on:** May 16, 2010, 01:22:19 AM »

^

I believe it's JB racing or something like that

Romrog318is · « **Reply #21 on:** May 16, 2010, 05:08:52 PM »

umm i dont have much problem keeping up with our 6 pot brothers

lmfao

okay jk jk
yea b4 i swapped my M42 out it ran GREAT ive got a few vids on here sumwhere

thebutcher37 · « **Reply #22 on:** May 19, 2010, 01:39:37 AM »

Quote from: Romrog318is;92525

umm i dont have much problem keeping up with our 6 pot brothers lmfao

okay jk jk
yea b4 i swapped my M42 out it ran GREAT ive got a few vids on here sumwhere

Envious :eek:!!!

Romrog318is · « **Reply #23 on:** May 19, 2010, 05:51:57 PM »

Quote from: thebutcher37;92617

Envious :eek:!!!

haha no need to be envious u can do it too

lol

oh and mines not an M50

lol