Author Topic: m42 coil? confused (Read 2895 times)

///m42 sport · « **on:** December 08, 2009, 07:12:24 PM »

So I was gonna replace a coil and had Patrick on BMA double check the part #.
I was told by Patrick BMA I can just take the rubber part off the ignition coil. Looking at the part, I dont' think its possible.

Boosted E30 · « **Reply #1 on:** December 08, 2009, 07:37:41 PM »

yes just pull the rubber boot off of the coil and install shouldnt be a problem

///m42 sport · « **Reply #2 on:** December 08, 2009, 07:47:01 PM »

SO I guess its just upside down when compared to this pic?

///m42 sport · « **Reply #3 on:** December 08, 2009, 09:12:53 PM »

nevermind I just answered my own question. haha

///m42 sport · « **Reply #4 on:** December 09, 2009, 12:38:20 PM »

So I installed the coil today. The securing clip is upside down from the original. Other than that everything went smoothly. The rough idle I had is way better. I bought new spark plugs and wires at the same time. Hopefully this is the end of my problems for a while. Gonna go test it out now.

BTW I can post short writeup for anyone interested. Its a pretty simple install.