1
Member Profiles / manchuk
« on: August 07, 2011, 09:36:46 PM »
hey guys havnt done much too her still but noticed the turbo was leaking a bit of oil so i completly rebuilt it and changed the main intake boot ill post some pics shortly
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Member Profiles / Mr Jezza's 318i M42
« on: June 28, 2011, 12:43:31 PM »
15-20hp per stripe nice gains brother
3
Member Profiles / manchuk
« on: June 22, 2011, 11:49:08 AM »
it seems like a not so expensive build but i completly rebuilt the hole moter plus i added vac tefcoat bearing all around arp head studs and lowered the compression and used deves rings so its a little more than just makeing a junkyard turbo kit
yes i used a used turbo and did some fabricateing myself but i made the moter strong enough to jam 20psi down its throat if i want to in the future but for now ill stay at the 12psi that this turbo can handle so no it is not completly inexpensive becuase i prepared the moter for future hp
yes i used a used turbo and did some fabricateing myself but i made the moter strong enough to jam 20psi down its throat if i want to in the future but for now ill stay at the 12psi that this turbo can handle so no it is not completly inexpensive becuase i prepared the moter for future hp
4
Member Profiles / manchuk
« on: June 18, 2011, 11:01:19 PM »
hey guys got my self into some trouble went too jail for 8 months and havnt had a chance to work on my bitch anyways im out now and will update the build hopefully
5
Member Profiles / manchuk
« on: November 07, 2010, 04:40:17 PM »
no im not running a independant management!!!!!!!!!!!!!
bears bmw, bmw connect, midnight tuneing is going to hook me up with a custom ecu (#175) chip to get me running on #42 injectors to drive the car down to ottawa and then custom tune for 15psi from there , apparently that mother fucker knows his shit so he has advised me when im ready we will doo it , check out his vids on you tube
bears bmw, bmw connect, midnight tuneing is going to hook me up with a custom ecu (#175) chip to get me running on #42 injectors to drive the car down to ottawa and then custom tune for 15psi from there , apparently that mother fucker knows his shit so he has advised me when im ready we will doo it , check out his vids on you tube
6
Member Profiles / manchuk
« on: November 07, 2010, 04:34:05 PM »
dont worry im going cop kit but i got it running off wires for now
i still cant believe i bought the garrett ta0301 turbo for 150 and it runs as good as it does,
but anyways here it is
i still cant believe i bought the garrett ta0301 turbo for 150 and it runs as good as it does,
but anyways here it is
7
Member Profiles / manchuk
« on: November 07, 2010, 04:30:02 PM »
well havn't been here for awhile boys but its mother fuckin turbo time biytches
8
For Sale / 15" basketweaves with centre caps
« on: November 02, 2010, 04:33:45 PM »
lowered to $250 plus shipping
9
Member Profiles / manchuk
« on: October 28, 2010, 10:06:52 PM »
well went to go start it for the first time today and the starter was siezed , i was actually able to take it apart and rebuild it on the spot, finally at 10.48 the car turned over and started instantly, i mean fucking instantly, i just wanted to here it after the com[plete rebuild. thanks frank you did a fucking awsome job giveing me a hand
10
Member Profiles / manchuk
« on: October 27, 2010, 07:30:45 PM »
turbo came today cleaned it up a bit it spins freely and has no shaft play lets hopethe seals are good
11
For Sale / 15" basketweaves with centre caps
« on: October 25, 2010, 12:04:02 AM »
found the centre caps
12
For Sale / new mustang injectors for sale
« on: October 24, 2010, 09:20:54 PM »
these are a picture of them, i dont have an actual picture becuase they are under the intake and i cant snap a pic but i only have 4
13
For Sale / 15" basketweaves with centre caps
« on: October 24, 2010, 08:58:29 PM »
let me know if im asking to much i based my price on what i found on the net people are asking upwords of $450 all over the place
i have the centre caps in a box in my basement
i have the centre caps in a box in my basement
14
For Sale / new mustang injectors for sale
« on: October 24, 2010, 08:30:15 PM »
when i first started my rebuild i bought the 4 pintle #19 mustang injectors, i was going to supercharge with fmu, now im going to be running a turbocharger instead so i will need #42 and a custom tune these injectors where installed but never run i paid $207 for all 4 i would like to get $100 plus shipping willing to take offers , these are not rebuilds, these are brand new,