1
Swaps, Turbos, Buildups / Bump
« on: July 05, 2009, 07:26:32 AM »
MORE INFO thinking about this project myself(INTERESTING POST)
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Engine + Driveline / engine making nosie at 4500 to 6000 rpm
« on: June 29, 2009, 06:05:32 PM »
hi i have a 92 318is car runs normal,I drove my car to 5000 rpm and i can hear a grinding noise from the engine (only at 4500 to 6000 rpm) i think is the chain tensioner but i could be wrong and suggestions? thank you
3
Engine + Driveline / HI ENGINE SWAP 318is to and 325is
« on: June 10, 2009, 07:53:06 PM »
HI wondering what need's to be change on a 318is 92 e36 , for a swap to a 325is /do i have to mob the harness or it plugs in and engine mounts? ect.please give me a list of parts that needs to be change for perform this swap
4
Swaps, Turbos, Buildups / hey
« on: October 17, 2008, 11:33:44 PM »
what site can i purchase a 318is turbo kit at?? with the exhaust manifold and all of the parts :p
6
Electrical / hi AIRCONDITION problem
« on: February 27, 2008, 06:35:30 PM »
hello i have a 318is and if u stand in front of the car to the left down there a AC
i had to take my water pump off and when i was prying it i hit a yellow chip or something that on top of the ac compressor and when i look at it there a wire connect to it that has to connect to the ac am not sure if this gonig to cause a problem but my dad said is a ground??? wat should o do that you
i had to take my water pump off and when i was prying it i hit a yellow chip or something that on top of the ac compressor and when i look at it there a wire connect to it that has to connect to the ac am not sure if this gonig to cause a problem but my dad said is a ground??? wat should o do that you
7
Engine + Driveline / Fan clutch - cant break nut
« on: February 27, 2008, 12:20:50 PM »Quote from: mdl76;35551
Trying to replace the water pump....
What a byach... Ive held the belts to keep the pulley tight and smacked the crap out of the 32mm nut with a hammer and she will not budge.
will a pulley holder make this a lot easier? I wonder is Murrays auto parts lones them out. Ive sent over a hour on this thing with no luck. Am I doomed to buying a $40 holder Ill use 1x every 3 years?
whats your guys experience with this?
i had the same problem trying to get to the water pump that nut connect to the fan clutch u have to tighting it to remove it lefty loosey right tighty
somehow moving the nut to the left doesn'y loose that nut u have to turn it clockwise
8
Engine + Driveline / Broken waterpump
« on: February 27, 2008, 12:16:01 PM »Quote from: rfritz;39669
I got it out, it seemed like it was suctioned in there, but broke free. I was checking to see if it was a plastic impeller, it was metal one. I guess it probably needed changed anyway. :rolleyes:
Now I can get busy with cleaning this grease magnet of an engine...
how u get it out???
9
Get Togethers / Anyone in NY area with a water pump tool that I can borrow
« on: February 27, 2008, 12:11:36 PM »
10
Get Togethers / Anyone in NY area with a water pump tool that I can borrow
« on: February 27, 2008, 12:10:23 PM »
hmmm back to the water pump issue HELP where did u pry it from and how is that tool use??? am so confuse how to take off the water pump i know is easy but mine was never change 140k miles and the jack holw broke off so the only way to take it off is by prying it and u guy did it before with damaging anything so please a picture were to put the pry bar or wrench to take this out wat a headace just making sure am doing the right thing please a picture or a hit the new water pump look like this take this picture and image it and show me where to stick the pry bar please
12
Engine + Driveline / My waterpump hurts!
« on: February 27, 2008, 12:01:53 PM »Quote from: PaulC;41841
Nevermind, the crobar w/ more penetrant worked!
where u penetrated with the crobar?? the side of the water pump or the connector where the fan clutch connect
i have the same problem and is stuck don't know where to pry it out from down want to hurt timing chain cover
14
How-To's / Installing HID Lights
« on: October 28, 2007, 12:58:47 PM »
thank for showing us how to install HID really helpful GOOd WOrk
Pages: [1]