BBS rims on eBay...

[bimma_318iS]

Is there any way to make these BBSs fit my 318is?
http://cgi.ebay.com/ebaymotors/JDM-BBS-16-x-7-4x114-3-offset-33-Wheels-Rims_W0QQcmdZViewItemQQcategoryZ43956QQihZ001QQite mZ110013610696QQrdZ1

Thanks.

[M42boy]

Is there any way to make these BBSs fit my 318is?

Thanks.
Not unless you have some special 318iS that is 4x114. :cool:

They do look sick on a 300ZX!

[D. Clay]

1) 10 mm spacer
2) Drill and tap hubs for 4X114.3 bolt pattern
3) Only if the center hole is 57.1 mm or larger.
Add cost of wheel bearings necessary to R&I hubs for drilling.
Cheaper to get OEM 14X6 weaves and put a BBS sticker on the center cap or get the 15's for an E30 in 4X100.

[M42boy]

1) 10 mm spacer
2) Drill and tap hubs for 4X114.3 bolt pattern
3) Only if the center hole is 57.1 mm or larger.
Add cost of wheel bearings necessary to R&I hubs for drilling.
Cheaper to get OEM 14X6 weaves and put a BBS sticker on the center cap or get the 15's for an E30 in 4X100.
Fu<k that! Just get some Ronal 15x7" weave look-a-likes brand new for $156 a rim.

[2002maniac]

You could have the holes welded shut and redrilled, but I dont think it would be worth it. There are plenty of good looking wheels for e30's