aftermarket sterring wheels

[jfdublyu]

does anyone know how many holes there are for the sterring wheel? I'm trying to find out what type of momo adapter i need. I have the airbag steering wheel.

[2002maniac]

one splined hole. Get on ebay and search for " e30 momo adapter" I picked mine up for $45 shipped. You will need that adpater and a spacer because the adapter is meant for a non-airbag steering column.

I have a Sparco 368. Sexy

[thumper3ld]

This is what I got:

http://i7.photobucket.com/albums/y275/thumper3ld/BMW/Interior/DSC02075.jpg

[jfdublyu]

cool thanx. i was looking at steering wheel on ebay, just search like "NRG red steering wheel" if you wanna see

[jfdublyu]

hey, i found a 15mm and a 25mm spacer on ebay, what's the smallest size that will fit? Or, what size do you have and where is the steering wheel in relation to the ol airbag one? same, farther, or closer? cause i would actually like mine to be a little closer than stock (i have shorter arms being only about 5'8")

[2002maniac]

The spacer you need is not for the wheel itself. You put it in front of the adapter under the steering shaft nut.

[jfdublyu]

ok, but do i need the 15 or 25mm? if either one will work then i will go w/ the 25mm

[2002maniac]

please post a link to the auction. I dont think it is what you need.

[christophbmw]

one splined hole. Get on ebay and search for " e30 momo adapter" I picked mine up for $45 shipped. You will need that adpater and a spacer because the adapter is meant for a non-airbag steering column.

I have a Sparco 368. Sexy
hey could you post a pic? im thinking about getting a sparco 370 but dont know how it will look. thanks.

[enildeR]

This is what I got:




Where did you buy that steering wheel from? If ebay, what BMW did it come out of?

[jfdublyu]

The spacer you need is not for the wheel itself. You put it in front of the adapter under the steering shaft nut.

I don't know, where did you buy your spacer? can you find any link to one like it so I can see wht it's supposed to look like?

[thumper3ld]

Where did you buy that steering wheel from? If ebay, what BMW did it come out of?

Its the blackline steering wheel made by nardi that I got off of ebay. Im not sure if they came with any cars stock though.

I don't know, where did you buy your spacer? can you find any link to one like it so I can see wht it's supposed to look like?

The spacer he is talking about I believe is just a steering column ring. You can get one from the dealership for like 6 bucks. Dont remember the part # but if Febi Guibo can chime in, he may be able to provide it.

[2002maniac]

I don't know, where did you buy your spacer? can you find any link to one like it so I can see wht it's supposed to look like?

I made it out of aluminum. I dont remember the dimensions but you could just stack some washers if you're ghetto.

[Febi Guibo]

It's tough finding the right washers... even in the ghetto!

you want a steering ring #32311120260

works like it was meant to be there

[jfdublyu]

thanks!

[jfdublyu]

where did you buys yours from? dealer?

[asubimmer]

I bought some washers at ACE for mine

[Febi Guibo]

it's like $3.50 from BMA...

[thumper3ld]

its 6 bucks at the steeler

[2002maniac]

hey could you post a pic? im thinking about getting a sparco 370 but dont know how it will look. thanks.
Sorry it took me so long, but here you go.

http://img.photobucket.com/albums/v485/2002maniac/MMP%205-20-06/IMG_0215.jpg

[mrjezza]

I've had a couple of steering wheels and by far my favourite is the M Tech 1 (the one with the /// stripe on the bottom of the vertical spoke).