kowalski
10-21-2007, 05:20 PM
I have a haltech E8 ecu thats about 2 months old. mint condition. Installed for 2 weeks and pulled. I also have a wiring harness for this system, and the computer cable for it. $1,400. If you would like the Haltech and all the pieces to get the haltech running on the E30 $1,700.
Haltech will come with all the necessary components to adapt to E30. i.e. 1 BAR MAP sensor, 3" Ferrari AFM (3 of them, I checked ebay and these are going for 195$), misc adapter plugs for AFM and map sensor and other plugs. Ignition amplifier with plugs. If its for an m42 i have an adapted stock harness i can include. I have a K&N cone intake filter thats brand new as well to include in this. price neg. for this stuff depending on whether you buy the Haltech or just want pieces of this.
Haltech/Innovate (innovate wide band system with haltechs name on it) wide band 02 sensor with controller and gauge. Gauge is black, and has a black ring and a chrome ring, both come with it. I have all the hardware and CD for this as well. SOLD
As well if anyone needs any CNC work done you can email me to work something out my brother owns ktech manufacturing (http://www.ktechmanufacturing.com/)
- 1 pair of Euro Grills - 50$ SOLD!
- 1 pair of smoked euro elips SOLD!
- M47 crankshaft unused snub nose (2.1L stroker) SOLD!
- M44 crankshaft polished (2.0L stroker) SOLD!
- S50 pistons shaved down and lightened (301 grams) to stock compression & use with stock rod with M44 crank SOLD!
- 5 speed transmission with 40,000 miles on it
some other parts i have if there is any interest pm with offers (all M42, 318is parts)
- clutch&flywheel $100
- AC compressor and components $150, did not leak when pulled
- stock header
- cams $50 good for sending away to get ground if you dont want to down your car
- power steering pump(s) $50
- lifters
- coils (10 of them 2 new and 8 used) 2 new and 2 used $100 shipped.
- plug wires (1 set new, 1 set used, 1 used set of "hotwires") hotwires are sold. 100$ shipped for the new set
- M42 engine wiring harness (92 and up m42 harness mint, 2 hacked up m42 harnesses)
- ABS computer $50
- ABS pump $50
- ICV (SOLD)
on that note, i'm still building my stroker motor, i have even more parts then this believe it or not, but i need some money to get me through the school
Haltech will come with all the necessary components to adapt to E30. i.e. 1 BAR MAP sensor, 3" Ferrari AFM (3 of them, I checked ebay and these are going for 195$), misc adapter plugs for AFM and map sensor and other plugs. Ignition amplifier with plugs. If its for an m42 i have an adapted stock harness i can include. I have a K&N cone intake filter thats brand new as well to include in this. price neg. for this stuff depending on whether you buy the Haltech or just want pieces of this.
Haltech/Innovate (innovate wide band system with haltechs name on it) wide band 02 sensor with controller and gauge. Gauge is black, and has a black ring and a chrome ring, both come with it. I have all the hardware and CD for this as well. SOLD
As well if anyone needs any CNC work done you can email me to work something out my brother owns ktech manufacturing (http://www.ktechmanufacturing.com/)
- 1 pair of Euro Grills - 50$ SOLD!
- 1 pair of smoked euro elips SOLD!
- M47 crankshaft unused snub nose (2.1L stroker) SOLD!
- M44 crankshaft polished (2.0L stroker) SOLD!
- S50 pistons shaved down and lightened (301 grams) to stock compression & use with stock rod with M44 crank SOLD!
- 5 speed transmission with 40,000 miles on it
some other parts i have if there is any interest pm with offers (all M42, 318is parts)
- clutch&flywheel $100
- AC compressor and components $150, did not leak when pulled
- stock header
- cams $50 good for sending away to get ground if you dont want to down your car
- power steering pump(s) $50
- lifters
- coils (10 of them 2 new and 8 used) 2 new and 2 used $100 shipped.
- plug wires (1 set new, 1 set used, 1 used set of "hotwires") hotwires are sold. 100$ shipped for the new set
- M42 engine wiring harness (92 and up m42 harness mint, 2 hacked up m42 harnesses)
- ABS computer $50
- ABS pump $50
- ICV (SOLD)
on that note, i'm still building my stroker motor, i have even more parts then this believe it or not, but i need some money to get me through the school