View Full Version : Strut Bar Group Buy list and pics
Snowmann
04-07-2006, 06:37 PM
OK so heres the deal, I am going to offer this design to you guys... I started a new thread so that we arent throwing around ideas, but this thread is going to be for this bar in paticular...
Pricing will vary depending on the ppl but it will be in the 100-130 range.
The bar will be RAW, more people want it this way as they like to color match.
The bars mounting plates will be slightly different than pictured, they will only be a half circle and only utilize the 2 bolts, and the verticle drill-yourself hole.
Hardware will be included for the 2 additional holes.
So only post if you are down. I will lock in pricing sometime over the weekend. with a break down on 5, and probably a break down on 10, if we go higher I can probably discount even more, but since there is still not a strong following I dont see it happening... but won't rule it out.
list as of 4-10
1. e9nine
2. enilder
3. febi guibo
4. thumper3ld
5.
2 more definates please!
Pictures:
http://m42club.com/forums/attachment.php?attachmentid=22&d=1143853742
e9nine
04-07-2006, 07:10 PM
Put me down for 1 pending confirmation on final fitment with the new design and estimated time of completion/shipping.
1. Airik
Eurospec
04-07-2006, 07:46 PM
I'd be in if it weren't for my suspension rebuild.
Next time hopefully.
thumper3ld
04-07-2006, 09:02 PM
Im down if once I get my car fixed. Hopefully sometime next week or the week after.
enildeR
04-10-2006, 12:46 AM
Count me in.
Snowmann
04-10-2006, 12:49 AM
thats 3 solids... lets get 2 more and i can secure some pricing on 5... 10 we can go cheaper... call out ur friends folks
kowalski
04-10-2006, 01:09 AM
i'd be down but i'm saving for my engine...
asubimmer
04-10-2006, 02:32 AM
I wish that it was a double bar one.
enildeR
04-10-2006, 03:13 AM
the bar is of a fairly large diameter. it should hold up to anything you can do on the track.
Snowmann
04-10-2006, 10:59 AM
The double bar is not needed, at that point it is merely a looks thing... This bar and the bar on my 325 share the same design and both had a very noticable difference when installed. The 318is bar was used all last season on our race car as well...
Febi Guibo
04-10-2006, 12:36 PM
Please count me in!
thumper3ld
04-10-2006, 03:29 PM
When, do you need the money by? If not this week then I can be a definate.
Snowmann
04-10-2006, 04:10 PM
not this week, but pretty much once I get 5 I will get my plates cut... I cant justify cutting one set of plates
so when do u think you would be able to lay down the cash?
thumper3ld
04-10-2006, 07:44 PM
Throw me down. I'll have the cash ready as long as its not needed this week.
jfdublyu
04-14-2006, 10:37 PM
i would, but the next three weeks i got a new tranny and LW Flywheel coming. im Bee Roke, ye feel me?
Count me in. I just bought the car and need to start building the suspension.:D
jfdublyu
04-24-2006, 10:52 PM
so what's the price right now? i may be able to buy one if it's in lik 2 weeks
jfdublyu
05-01-2006, 09:34 PM
actually, mark me as definite. just keep us posted on progress and money deadline w/ payment info
Eurospec
05-02-2006, 02:56 AM
Earth to Snowmann....
We need an update from you.
jfdublyu
05-02-2006, 10:26 PM
Earth to Snowmann....
We need an update from you.
...serious...
FORGET THIS!!! :mad: You dont have to remove me from the list seeing how I was never on it. I found a upr strut twr bar somewhere else for $130.:D
jfdublyu
05-07-2006, 10:23 PM
hey AWGY, can we get a link for the sweet $130 strut bar? help a brutha out!
Heres the link. Hope it works.:)
https://secure3.nexternal.com/shared/StoreFront/default.asp?CS=bimmerworl&BusType=BtoC&Count1=595089137&Count2=512229561&CategoryID=20&Target=products.asp
Ok it, half works. after you go to this link, Its under Misc. susp. parts. Its a sparco strut for the E30 3-series.
And for you daring folk try this one:
http://www.autoaccessorystore.com/home_n.asp?dir=detail&id=60&wizard=&s=&mid=
e9nine
05-08-2006, 07:48 AM
Ok, it's been about a month now and I have decided to go with something else. Sorry for any inconvenience caused but please take me off the list.
e9nine
05-08-2006, 07:51 AM
Heres the link. Hope it works.:)
https://secure3.nexternal.com/shared/StoreFront/default.asp?CS=bimmerworl&BusType=BtoC&Count1=595089137&Count2=512229561&CategoryID=20&Target=products.asp
Ok it, half works. after you go to this link, Its under Misc. susp. parts. Its a sparco strut for the E30 3-series.
FYI in order to use the Sparco on an m42, you need to space it higher with washers to clear the intake manifold. That's what I did to make it work in the past.
Snowmann
05-08-2006, 10:27 AM
Sorry guys, I waited around for 2-3 weeks and we stayed at less then 5 people...
The shop got busy and I got busy with the engine build on the race car...
I will hang it out there that if we get 5 again we can do this - but I cant justify doing any work for less than 5 peices
Febi Guibo said he would purchase 2 to make the 5 min. easier to obtain
Ill re-subscribe
Febi Guibo
05-08-2006, 11:33 AM
thanks man, much appreciated... I thought we had 4 already, so my +2 = 5
folks chime in and reconfirm!
Ok, it's been about a month now and I have decided to go with something else. Sorry for any inconvenience caused but please take me off the list.
What did you decide to go with?
jfdublyu
05-08-2006, 09:33 PM
oh, i already knew that about the sparco...i was hoping you had found a different one, oh well. hey e9nine, +1 awgy's post ^
kramerica5000
06-03-2006, 09:11 AM
I hope its not too late to get in on this, but I'd like to get one if possible. Let me know please :)
Sorry guys, I waited around for 2-3 weeks and we stayed at less then 5 people...
The shop got busy and I got busy with the engine build on the race car...
I will hang it out there that if we get 5 again we can do this - but I cant justify doing any work for less than 5 peices
Febi Guibo said he would purchase 2 to make the 5 min. easier to obtain
Ill re-subscribe
vBulletin® v3.7.0 Beta 3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.