Author Topic: [Group Buy. M47 crankshaft] Check interest (Read 23310 times)

5m1dy · « **Reply #15 on:** April 29, 2012, 03:22:54 AM »

I'd be really keen for a m47 crank, depending on the shipping price to Sydney, Australia.

ToniBmwPortugal · « **Reply #16 on:** May 22, 2012, 03:41:02 PM »

Quote from: 5m1dy;112223

I'd be really keen for a m47 crank, depending on the shipping price to Sydney, Australia.

I'm sure that can be arranged but i'm afraid its gonna cost more the shipping than the crank itself...

e30jake · « **Reply #17 on:** July 17, 2012, 07:41:40 PM »

Is this thread still alive? I might be in the market for one in the not too distant future...

ubergolf97 · « **Reply #18 on:** August 07, 2012, 09:17:19 PM »

Just throwing it out there that I too am interested (currently sitting on the money, will only spend it on the crank or pistons if I find a good deal on them). Working on getting one from another source at the moment. If one from Portugal comes in around the same price before/if this one comes through, count me in for the group buy.

ubergolf97 · « **Reply #19 on:** August 17, 2012, 09:15:44 PM »

The crankshaft I found ended up being from an m47n engine. Any chance of this thread being brought back to life?

DesktopDave · « **Reply #20 on:** August 18, 2012, 08:08:27 AM »

Seems like it's dead, but you never know. Made me wonder if an M47N crank would fit an M44?

ubergolf97 · « **Reply #21 on:** August 18, 2012, 10:49:44 AM »

I'm having a hard time finding the information I saw last year before I put this project on hold. I think the m47n has a completely different oil pump setup and much shorter crank snout. I haven't seen any builds able to use the m47n crank yet, but I could be wrong.

Anybody have any other leads on a crank? The dealership can get me one, but I don't like their price of $1200. Plus a $100 core charge since I don't have an m47 crank to return. Plus tax.

NO717 · « **Reply #22 on:** August 24, 2012, 03:12:15 AM »

I'm in Germany and have access to these cranks. I'll let know of the results.

ubergolf97 · « **Reply #23 on:** August 28, 2012, 10:00:04 PM »

Quote from: NO717;115127

I'm in Germany and have access to these cranks. I'll let know of the results.

Please do!

ToniBmwPortugal · « **Reply #24 on:** October 14, 2012, 04:24:09 PM »

Hi there folks,
I have one crankshaft right now that i can sell for 300 euro plus shipping....
Anyone interested?

Regards

IlovM42 · « **Reply #25 on:** October 15, 2012, 04:47:47 AM »

I also have one sitting in a M47 block in my garage cuz i finally don't go for the stroker route, so if someone is interrested, but have no idea of the cost of shipping from france to your destination...

E30noob · « **Reply #26 on:** November 03, 2012, 08:59:27 PM »

Quote from: ToniBmwPortugal;116835

Hi there folks,
I have one crankshaft right now that i can sell for 300 euro plus shipping....
Anyone interested?

Regards

I've sent you a PM about the crankshaft.

ToniBmwPortugal · « **Reply #27 on:** December 27, 2012, 07:08:27 AM »

See post below

ToniBmwPortugal · « **Reply #28 on:** December 27, 2012, 07:10:17 AM »

Hi there!

I just wanted to say that the first crank is sold and delivered to the user E30noob and everything went allright.

If someone has interest on an M47 88mm crank just talk with me. Here are some photos of the process:

Regards,

Ant�nio

keflaman · « **Reply #29 on:** December 27, 2012, 09:35:22 AM »

May I ask how much shipping was?

Author Topic: [Group Buy. M47 crankshaft] Check interest (Read 23310 times)

IlovM42