So I'm about to undertake my cooling system overhaul. Right now the car's issue is it runs too hot while idling or stop and go. It will go beyond the 3/4 mark before red which is when, hopefully, I'm at speed or shutting the motor down to cool.
Now, after I changed all my coolant/vacuum hoses, I lost a bit of coolant, so I topped off with distilled water and bled the system. I noticed now even while the engine is at operating temp and I turn the heater on for the first time, it still takes a bit to warm or get remotely hot. My water temp gauge will fluctuate from 1/4 to above 3/4, at speed, hover around 1/2 till i come to a stop or have to go uphill where it will slowly rise and get hotter.
I'm thinking its a combination of a faulty thermostat or possibly the water pump needs replacement or I need a new fan clutch or all 3. What do you all think?