Author Topic: Break Pad Wear Sensor Install (Read 2374 times)

DesertEagle · « **on:** April 07, 2010, 07:41:56 PM »

Hey All,

Has anyone ever had difficulty installing the rear brake sensor. I'm talking about just pushing the sensor into the pad cutout. I cracked one sensor. The second one sticks when the springs/clasps are fully depressed. The pads are Textar and the car is a 1991 318is. Is there something I'm missing or is there a trick to it?

Sincerely,

Churning in my own anger...

1991 E30 M42 · « **Reply #1 on:** April 07, 2010, 09:07:26 PM »

I removed the entire pad wear harness and took the light out of the cluster, problem solved

DesertEagle · « **Reply #2 on:** April 09, 2010, 08:54:10 PM »

you're not too fond of the stock setup, huh?

1991 E30 M42 · « **Reply #3 on:** April 10, 2010, 01:07:12 AM »

i dont like anything stock

ecalder · « **Reply #4 on:** April 10, 2010, 09:17:29 PM »

I had the opposite problem, on my hawk hps pads the sensor won't clip in tightly, it's loose and just falls out! Should I glue it?