Author Topic: Converting to One windshield wiper..? (Read 4102 times)

AlpineRob · « **on:** January 17, 2009, 09:59:40 PM »

Hey guys, not sure if anyone has this problem, but my wipers have never worked properly..typically when wipers operate they always go all the way back down to the bottom of the windshield..when my wipers are not wet enough, they don't..sometimes they end up stopping 6" too high..even with new wipers, and tightening the wipers to the car..they still don't work as well.. they have never malfunctioned electronically..work fine..

I was thinking on converting to one wiper to ease the pressure and work from the wiper motor..Ive seen it done but what should be done in order to do this?

And of course if anyone has a recommendation on how to fix my problem without switching to one i'm open to that as well. Thanks a lot!

ClodKing · « **Reply #1 on:** January 20, 2009, 04:14:48 PM »

That sounds like a good idea.

I'd like to see how this would be done aswell.

1991 E30 M42 · « **Reply #2 on:** January 20, 2009, 10:59:30 PM »

akg motarsports sells a kit

Jimmy Lewis · « **Reply #3 on:** January 21, 2009, 09:55:40 AM »

Quote from: 1991 E30 M42;65088

akg motarsports sells a kit

Speaking of motars, my motar won't start. Give me a call.

Zilla · « **Reply #4 on:** February 18, 2009, 10:55:51 PM »

akg motOrsports

has it for $260, it uses the existing motor. here is the link:

http://www.akgmotorsport.com/monowiper.html

charlesmarseille · « **Reply #5 on:** February 24, 2009, 07:41:19 PM »

your wiper motor is done mate! check with another e30 if its the same power if you try to stop it from going.