Author Topic: compressions (Read 3330 times)

B318M42W · « **on:** January 05, 2009, 09:58:17 AM »

hey everyone! i'm lost right now. I did 2 compression test and the # d'ont match. first test: 205-215-215-210 done cold. second test done hot: 165-195-190-175. I don't know what to think about it and i'm basing part my descion on whether to sell or not on this test.

Thanks for any input!

Sophia69IS · « **Reply #1 on:** January 05, 2009, 10:12:50 AM »

You mean that you don't know which test is accurate? Because I know that you are supposed to run your compression tests after the engine is at running temp. So I would go with the second one.

KenC · « **Reply #2 on:** January 05, 2009, 10:20:54 AM »

165 is on the cusp of being too low for combustion. I'd put a tiny bit of oil in that cyl, manually crank the engine a few times and retest it. If it goes up significantly, your rings are a little worn.

Also, you have your fuel pump relay and/or fuse out during this too, right? Wash-down could be giving you some low readings, not to mention score your cylinder walls.

B318M42W · « **Reply #3 on:** January 05, 2009, 11:11:46 AM »

thanks! i'll try a re-test without any cool-down time (it had a chance to cool down a little before testing). and yeah, the fuel relay was out.

B318M42W · « **Reply #4 on:** January 06, 2009, 03:18:57 PM »

the results are in! heres the new test: 207-202-202-207. WAY better than the last one! while waiting for it to heat up, I took a video of the engine. anyone has any ideas why it has somesort of cyclic sound and vibration (near the end)?

http://s729.photobucket.com/albums/ww298/B318M42W/?action=view¤t=100_3823.flv
http://s729.photobucket.com/albums/ww298/B318M42W/?action=view¤t=100_3822.flv

thanks again for any input!

B318M42W · « **Reply #5 on:** January 14, 2009, 05:04:39 PM »

xwill112x · « **Reply #6 on:** January 14, 2009, 08:42:47 PM »

how many miles?

have you changed the tensioner?

bbarnumboy · « **Reply #7 on:** January 14, 2009, 10:48:40 PM »

anyone know what the stock recommended compression is ?

KenC · « **Reply #8 on:** January 14, 2009, 11:41:59 PM »

Quote from: bbarnumboy;64700

anyone know what the stock recommended compression is ?

~200-210 I believe

B318M42W · « **Reply #9 on:** January 15, 2009, 04:19:36 PM »

the tensioner has been changed, has 170 000 original miles and stock compressions i beleive is 225 psi

bbarnumboy · « **Reply #10 on:** January 15, 2009, 10:41:40 PM »

ok cool i will have to check mine. it is at 190,000 miles and i changed the tensioner about 15,000 miles ago