Author Topic: Vibration getting way worse (Read 5745 times)

tjts1 · « **Reply #15 on:** June 06, 2007, 01:34:24 AM »

Is that the original stock muffler or something else? It looks awful clean. Mine is rusrty and leaking and I'm looking for something new.

sumyungguy · « **Reply #16 on:** June 06, 2007, 01:44:57 AM »

Quote from: tjts1;27174

Is that the original stock muffler or something else? It looks awful clean. Mine is rusrty and leaking and I'm looking for something new.

yeah its a cheap muffler shop job, cat back with a new resonater and OEM style muffler for $160. It works but I want something a little bit nicer.

sumyungguy · « **Reply #17 on:** June 06, 2007, 01:52:43 AM »

Quote from: sumyungguy;27172

the root of evil--

some brand

random bolts and nuts (16mm and 17mm)

after looking at these I got to wondering..

Should there be washers on each side of the bolts???

tjts1 · « **Reply #18 on:** June 06, 2007, 03:03:09 AM »

Nope. Looks like just the guibo end has washer.

kowalski · « **Reply #19 on:** June 06, 2007, 06:42:01 AM »

are those those rarish Japanese made wheels your rocking? looks like its time for some new bolts that makes me want to go double check mine again...

sumyungguy · « **Reply #20 on:** June 06, 2007, 08:44:16 AM »

Yeah they are pretty rare, the date stamp says 1987 and Ive never seen them before. It took a lot of digging to find out what they are.

Getting new bolts and nuts today.

kowalski · « **Reply #21 on:** June 06, 2007, 10:45:18 AM »

i've seen them twice before, they're cool looking. Made in japan specifically for the e30. I heard rumors they were optional from the dealer there but i don't think thats right... how much do they weigh?

sumyungguy · « **Reply #22 on:** June 07, 2007, 02:42:14 AM »

After breaking my only puller and 3 hours of trying to rig a new new one. I finally got the centering bearing out of the drive shaft by, thats right, a dremmel and a steady hand in only about 30 min.

ghey.. (the bolt was used for the final extraction)

good to go

In the end vibration is gone and it was a fun little project, it was hard to get youst to working on the floor again cause I always go to the shop to do work.

Thanks for your help guys.