Author Topic: OE Catalytic Converter Brand (Read 2474 times)

sepehr · « **on:** January 09, 2007, 01:28:58 AM »

Who made the OE cats on the 318is? Was it Miller? Eberspaecher?

sepehr · « **Reply #1 on:** January 09, 2007, 05:12:24 PM »

Anyone running an aftermarket cat? What brand and do you have the part #?

thanks

D. Clay · « **Reply #2 on:** January 09, 2007, 08:17:11 PM »

DEC is good bolt on OEM replacement. They fit just like the OEM. $400. Miller is not as good quality wise. Buying a Magnaflow CAT and having it welded on is a low cost alternative. Part $70 + install. The Magnaflows don't have a problem passing emission requirements as far as I know.

gimpy9195 · « **Reply #3 on:** January 10, 2007, 12:24:35 PM »

what should i get if i need from the headers back. i broke one bolt while changing my clutch. and should i just get new headers also? or not risk breaking a bolt at the block?

sepehr · « **Reply #4 on:** January 10, 2007, 10:49:06 PM »

Any one in the Lower Mainland, BC, know of a good exhaust shop? Not too far from the North Shore?

Author Topic: OE Catalytic Converter Brand (Read 2474 times)

gimpy9195