Author Topic: DASC Intercooler (Read 6191 times)

M42_Jester · « **on:** April 02, 2010, 07:46:07 PM »

Does anyone know whether u need an intercooler or something of the like for the DASC kit?

also, wats the maximum psi that the DASC puts out?

Cheers,
Jester

doitover · « **Reply #1 on:** April 02, 2010, 08:33:34 PM »

I've read that an intercooler isn't required at the 7 psi the DASC makes. On the other hand, Procharger's website goes to great lengths to argue that it does. I tend to side with the opinion of people that aren't selling intercoolers.

deekay · « **Reply #2 on:** April 02, 2010, 09:49:53 PM »

jackson racing used to integrate an intercooler into their roots setups, but i don't know how.

could always consider water/meth injection as an alternative if you want to run a smaller pulley for more boost.

nuvolarossa · « **Reply #3 on:** April 03, 2010, 02:04:04 AM »

When mine was custom supercharged @8psi with same S/C than DASC (eaton m62) I made it first not intercooled and then intercooled.
The difference was clear, never dynoed but more torque was there, especially in summer or after hours of hard driving.

---

This car is from 318ti.org, the owner is ZeroG. He was developing a water intercooler for DASC. Here you can see it:

Hodge · « **Reply #4 on:** April 03, 2010, 06:22:39 AM »

I really want that IAAS intercooler setup. Probably not the most efficient setup, but it definitely looks like an improvement. I will probably look into making my own at some point.

nickmpower · « **Reply #5 on:** April 03, 2010, 12:30:54 PM »

Is ZeroG going to be selling those?

Hodge · « **Reply #6 on:** April 03, 2010, 08:08:48 PM »

Not a chance...I am pretty sure that picture is a few years old.

To be frank, nobody cares about the DASC anymore. They were quite popular a few years back from the looks of it, but these days everybody just wants to swap.

kevins08 · « **Reply #7 on:** April 03, 2010, 09:30:31 PM »

......or snail it.

HaNasich · « **Reply #8 on:** April 17, 2010, 12:50:42 PM »

My M42 had DASC on it, i cant see how an IC can be fitted to the setup - the SC mounts directly to the intake mani - so no IC pipes can run in between.

how can one install IC on DASC?

doitover · « **Reply #9 on:** April 17, 2010, 09:06:56 PM »

replace the manifold with the ic? There is a pretty good sized distance from the supercharger to the head.

dwtaylorpdx · « **Reply #10 on:** April 18, 2010, 01:07:29 AM »

The Ford Lightnings have water to air inter coolers, the inter cooler sits inside the manifold cavity... Its bigger than youd think...

Dave

deekay · « **Reply #11 on:** April 19, 2010, 01:24:46 AM »

Quote from: doitover;91025

replace the manifold with the ic? There is a pretty good sized distance from the supercharger to the head.

the DASC involves replacing the manifold already.